Reply to thread

Message: [QUOTE="worldwide73, post: 9282, member: 652"] Start by locating your oil pressure switch here. Located next to your oil filter, the one with one wire, not two. Remove it. You can see the hole where the switch was here and the new fitting that will go in. [ATTACH=full]60293[/ATTACH] New fitting, #4 oring to 1/8 pipe, then you will also need an 1/8 pipe to #4 oring to relocate the switch later. Gates G60275-0402, and G60291-0402 are the two fittings you need. [ATTACH=full]60294[/ATTACH] I assembled as much as I could of the fitting off the truck. You can see it below. #4 oring to 1/8pipe, 2" straight to 1/8" tee and then a nipple on top for hose. I later replace the top nipple with a #4an fitting and stainless line for looks. [ATTACH=full]60295[/ATTACH] On the Tee part you'll want to use the 1/8pipe to #4 oring fitting to relolcate you oil switch. The wires are tight and probably could splice them and make them longer if needed. [ATTACH=full]60296[/ATTACH] [ATTACH=full]60297[/ATTACH] [/QUOTE]

Verification

Random media

Betsy_on_DYNO

epic4

complete

P6190009

IMAG0053

2013-03-09_15-42-52_372

Wheels for sale

avatar66_1

b4a9f0e3

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Today at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Total: 948 (members: 2, guests: 946)

Top