Reply to thread

Message: [QUOTE="Big Bore, post: 101240, member: 760"] Ok so I went down and pulled out a spare SD reservoir I was planning to use to mock some stuff up. The top and bottom gasket are completely different so just stacking is not even remotely possible. Cutting and welding is a very bad idea now that I look at it because there is no way you would get everything sealed properly inside and out. Cutting the bottom off and having a groove machined just like the top is going to be the best way. I'm going to take it to a machinist and see what it might cost to have the groove milled, or I might see if a buddy who has a mill would let me do it, its pretty simple really. That would increase the capacity considerably. Also, I figured out the best place to do the machining would be above the holes for the fuel bowl bolts since there is a block off right above where they go through the reservoir. Took pics but for some reason emailing them to myself didn't work and I'm too tired to figure it out tonight. Oh, and milling it out on the inside is definitely not a possibility there just is no extra material there IMO. [/QUOTE]

Verification

Random media

VVASSUP Juanito's F250 05 6.0 Harley Davidson TOYO RIZE RBP SCT MBRP S&

befor an after

IMG_20120223_155925

249

befor an after

IMAG00113

stacks3

My first pics

20170417_142706

befor an after

03 7.3 ZF6

Latest posts

GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Friday at 1:24 PM
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Thursday at 8:52 PM
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Thursday at 6:23 AM
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Wednesday at 11:09 AM
Suspension, Drive Train, and Tires
J
15 cab on 08
- Latest: jeretl
- Monday at 2:38 AM
Aftermarket Super Duty 1999 - Current

Members online

No members online now.

Total: 341 (members: 0, guests: 341)

Top