Reply to thread

Message: [QUOTE="twisthappyr6, post: 1496545, member: 846"] The rear went pretty smooth. Only real issue I ran into was needing to order the factory front hanger bolt and nut, along with a pinion shim and longer centering pin so the shim could be bolted to the pack. Couple notes, the conversion hanger came with a 3/4” hole drilled for the hanger. The factory 08 bolt is 20mm. So be prepared to enlarge the hanger bolt hole slightly. I bought a metric step bit that goes up to 20mm from amazon to do this. Also, the leaf spring centering pin is 7/16” fine thread, I simply took a 7/16” fine thread grade 8 bolt the correct length and rounded the edges to make the pin head. Worked perfect. Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

01212_fHodBcmgerg_600x450

2005_Excursion_with_20_wheels

C1968A89-7E21-41BB-9F01-CAF44C987D88

dual_pumps3

Lookin good

IMAG0080

qu7a7a3y

IMG_20120223_155950

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

Total: 585 (members: 2, guests: 583)

Top