Fan harness now no start

[SaNnDnSurF]

My fan clutch harness got caught in the fan last night and the truck shut off and said PCM fault, towed it home just put a new fan clutch in and when I try to start the truck it says check gauges and I get nothing. The glow plugs are not cycling under the hood like they should be either.

 

[stroke6.0]

Try unplugging clutch fan and crank

 

[SaNnDnSurF]

Replaced blown fuse #22 now when I turn the ignition on the lights start flickering on the truck and the starter clicks like the batts are weak

 

[SaNnDnSurF]

Tried that already thanks

 

[co04cobra]

Possibly shorted the PCM. You need to get it on a scanner and see if it will communicate.

That is after you verify batteries are not weak and check ALL fuses.

 

[webb06]

Are the batteries charged? Or have you checked?

 

[SaNnDnSurF]

Gonna charge them overnight I drained them last night but I don't think they are causing this issue

 

[SaNnDnSurF]

It was the batts they were super drained

 

[webb06]

It was the batts they were super drained

Easy fix. Good to hear

 

[SaNnDnSurF]

So if I woulda found the blown fuse the other night on the side of the road and unplugged the fan harness I coulda limped it home?