Reply to thread

Message: [QUOTE="Charles, post: 289580, member: 103"] To put things in perspective, experienced, professional engine builders agree that the intake plenum volume should be 1.5 to 2 times that of the engine displacement. For a 444 cubic inch engine, the low end for plenum volume would be 666 cubic inches at 1.5 times the engine displacement. If you made the plenum out of tube with a section width of 6 inches, it would need to be ~2 feet long in order to meet this requirement. That means a 6" diameter tube from the front to the back of the engine. That should sufficiently put things in perspective. [/QUOTE]

Verification

Random media

2011-11-09_18-18-49_469

GT45R_install_pics_and_test_drive_020

Minotaur Parameters

Big_R_Radio_Gospel_Channel

befor an after

7d6def78

O&G's 2011 F250 Journey

37639_1380292674996_1462297010_30993191_7998455_n

This is the lay out of the door wire harness for a 08

2011-11-01_18-34-41_290

Latest posts

Gauge cluster face plates
- Latest: crash86
- Yesterday at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Yesterday at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Yesterday at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain

Members online

ju015dd

Total: 235 (members: 2, guests: 233)

Top