Reply to thread

Message: [QUOTE="powerstrokedkid87, post: 1430056, member: 1658"] well got the rest of the motor somewhat taken apart over the weekend, looks like the crank is trashed, all the main bearings minus the front set spun, looks like we have some nicks in the cam...have to pull that out and really check it over... 1 piston has a few chips out of the skirt, and a 2nd piston has some serious where by the wrist pin. I have a new set of bearings coming this week, were going to put the new bearings in, and put the block back in the truck and double check the crank play when its bolted to the transmission. want to make sure that when this goes back together we have whatever the issue was that caused this taken care of.... going to be little bit of a long road but were making some progress [/QUOTE]

Verification

Random media

New Two Tone

photo_2_4

20160924_133950

20160102_140731

Got the decals

20160806_151030

lkl_wheels3

Picture_1207

2008 King Ranch motor work

2012-08-01_21-55-28_938

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Total: 492 (members: 2, guests: 490)

Top