Fuel cooler ******?

[6fodays]

Doing a single turbo on my 6.4 and spent about 3 hours pulling the stock chargers today. I got to wondering about getting rid of that junk. Anyone have a write up or any pics?....i got to wondering because i noticed the coolant hose coming from the actuator had to be removed and i barely had enough hose to run straight to the black tank up top. .


Sent from my iPhone using Tapatalk

 

[Somd_6.4]

Rescue diesel and elite make a kit. But most just do away with the cooler all together. Only complaint I've heard is the truck surging on long trips from fuel getting hot

 

[6fodays]

Only one i can find on wlites website is $900, i dont have to worry about driving long distances. And all the cooler cools is return fuel. Im just looking for an easy way


Sent from my iPhone using Tapatalk

 

[Somd_6.4]

Easiest way would be ****** the cooler all together then.

 

[6fodays]

That was what i was asking. How can it be done? I was looking for a write up but al i could find was someone bringing up the idea and then it turns into a big dick contest


Sent from my iPhone using Tapatalk

 

[CT9AIX]

I've had my fuel cooler ******d for 3 years and have driven all over the country... Never had any fuel temp issues. I also don't tow a lot, if you do and are constantly pushing the truck hard it might be a different story

 

[6fodays]

I've had my fuel cooler ******d for 3 years and have driven all over the country... Never had any fuel temp issues. I also don't tow a lot, if you do and are constantly pushing the truck hard it might be a different story

How did you do yours? Pics?


Sent from my iPhone using Tapatalk

 

[CT9AIX]

Fuel bowl ******, remove the cooler on the side of the IC, remove both rubber hoses that run to the VGT actuator and coolant reservoir for the fuel cooler, remove the electric pump for the coolant, then I used a tube to AN adapter to run the return from the heads/HPFP straight back to the tank. Don't have many specific pics of this stuff... Just general pics of it now with everything all done

 

[sootie]

why not just get a bracket to hold the fuel cooler? wouldn't that be a lot cheaper?

i seem to remember a vendor releasing something like this. maybe hit up bigrpowr

 

[6.4f350]

The H&S single kit comes with two little brackets to replace how it mounts on the stock U pipe. They're super simple, could be made with stuff from a hardware store and a little bit of time.