Reply to thread

Message: [QUOTE="IIVonnyII, post: 1452823, member: 27313"] I am going to be getting a stage 2 or 3 colt cam yes. after taking the block / crank / cam to the machine shop.. upon closer inspection, it appears the small end of the con. rod right under the wrist pin/ piston skirt was contacting the counterweight of the crank.. in 3 holes. fairly severely. edge of the rod was mushroomed over right at the top and the bottom of the counterweight looks like it was hit with a 5lb sledge a few times in the same spot. rod flex? none of the rods looked bent to the naked eye. crank walk cause that? possibility of a bent crank? or just rod flex [/QUOTE]

Verification

Random media

IMAG01291

photo1_5_

0091

2015 F350 Before

My Toys

IMAG0249

1511MG-1011

eleanor_part_two_83_

step_16

4" above stock

Latest posts

Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Yesterday at 7:22 PM
7.3 Tech
J
6.4 spartan
- Latest: jmathews90
- Yesterday at 6:16 PM
6.4 Performance
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Yesterday at 9:06 AM
6.4 Aftermarket
Y
Fuel sending unit and wheel studs
- Latest: Yojih123
- Yesterday at 1:00 AM
7.3 Tech & FAQ
Truck slipping into 4th
- Latest: ju015dd
- Wednesday at 10:39 PM
6.7 Tech

Members online

No members online now.

Total: 565 (members: 0, guests: 565)

Top