Reply to thread

Message: [QUOTE="doo dah, post: 1551154, member: 22536"] I have searched but none of the posts I found had the same issues, or at least description of issues, that I have. Last summer my truck would blow cold air and then hot, it wasn't cyclical rather once it went hot it would not blow cold sometimes for days. Did some research and bought the new evap temp sensor and plugged it in without removing the old one. Blew frigid cold for about 15 minutes then no air coming from the vents and what felt like cold air coming from the floor vents. Turn a/c off and leave vents on and eventually air started coming from the vents, cold at first eventually becoming warm. I figured the sensor was freezing the coil and the initial cool air was just outside air blowing over the coils so I got a recharge kit and system was a little low on pressure so added a can. Tried running a/c again and same thing happened so I unplugged the new sensor and plugged the old one back in and we had cold air for about a 3 hour drive. On the return trip home, no a/c just outside air through the vents for a few hours until we were 20 minutes from home and then started getting cold air. I'm at a loss and ready to go to a shop since this doesn't sound like a blend door or evap sensor issue, any suggestions? Thanks! [/QUOTE]

Verification

Random media

95_Bronco_conversion_pics_004

Picture_1204

DSCN3280

Mishimoto 6.4 Radiator

2011-07-28_17-24-25_31

13_2

2013-06-20

my truck!

torque_an_me_10-11_020

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 599 (members: 0, guests: 599)

Top