I replaced bearings, races seals, rotors, pads, calipers and parking brake shoes. Now the outside top spring is rubbing on the inboard side of the hub and squealing. Does anybody have any good ideas why this is, how to fix the problem? Oh, and replace all the hardware for the shoes.
At first I thought that I maybe the was a specific way the shoes were to go on, but after inspection of new shoes they are all the same. Old spring is not straight it has a slight bend just above the hub, new spring is straight. Maybe the hardware kit from NAPA is crap?
The spring is now worn about half way through.
At first I thought that I maybe the was a specific way the shoes were to go on, but after inspection of new shoes they are all the same. Old spring is not straight it has a slight bend just above the hub, new spring is straight. Maybe the hardware kit from NAPA is crap?
The spring is now worn about half way through.