Reply to thread

Message: [QUOTE="TripleE44, post: 1115303, member: 94"] With those pics, you wouldn't be able to see the swirls. Try holding a flashlight close to the paint, or on a sunny day a couple hours before or after 12noon you'd be able to see them. If you're running it through a brush wash, I promise you've got some. Mr pink is a good choice for an all around soap. That's what I buy by the gallon. The foam cannon, I thought the same thing. I tried to find a cheaper alternative but came up empty. You really want the one that hooks to a pressure washer. The alternative is the foam gun that attaches to a regular hose, it's a little less but puts out less foam also. Polish, The chemical guys v series is just easy. Goes v32,34,36 and 38. 32 is aggressive and 38 is light. I can't imagine you'd need 32 unless your paint was oxidized. 36 would probably do you fine. They do sell a kit that comes with all 4 in small bottles that should be enough to do the truck. I haven't tried jet seal, but I have no doubt that's a good choice. I've been using a bottle of the blitz spray and it does well from what I can tell. And it's quicker to apply being a spray. Wax, I prefer a paste. I just think it lasts better overall. I use the xxx hardcore from CG. It's not their nicest but I've been really really happy with it. Clay mitt. Get the damn clay mitt. It works just as good and soooooo much faster. The clay bar is so small it takes too long. The mitt is way better. One issue though is when I used it with the luber no matter how much I put on it marred the paint a little. It polished right off but if I wasn't planning on polishing after I'd have been pissed. Hopefully someone else can help you on that white paint. I haven't had the fortune of dealing with anything like that. [/QUOTE]