Search results

Recently my 97 E4OD has randomly at times not wanted to downshift into first gear coming to a stop, can manually put it in first with no issues, in regular Drive it will take off in 2nd gear and sort of slam into the next, although if parked for even 5 minutes the issue seems to stop and it...

Are the sediment bowls needed? Have had the kit installed for a while and the bowls seem to have a small leak, thinking of just removing the bowl and putting the original drain screw back. Basically how they come from Napa.

Got a distribution hitch when I purchased a 30 foot toy hauler, should I use it? Seems like unneeded weight hanging off the back of the truck, towed it about 25 miles home with a 16K hitch with a 2K tongue rating and it towed fine, didn’t seem to sway or upset the truck. Used my 97 F350 with air...

What is the wire on the back of a banks dynafact boost gauge for? Power or dimmer? Gauge came with the truck and was cleaning up the gauges and cut the back wire to remove the gauge, the gauge never turned on with the lights but it works

Installing a tru cool cooler this weekend, was thinking of changing the steel lines to larger rubber lines, 250 psi working pressure, anyone see a problem or potential issues? 97 F350 7.3

On my third Bosch 044 pump on my beans E fuel kit, first and second one totally died, third one seems to lose pressure when you get in it, fuel pressure is at 55-56 cruising, Stepping in it I can drop the pressure to Zero, then it builds back up, even harder when towing. Thoughts? Pump is only...

1997 F350, would a bad rotor cause a steering pull when braking? replaced Calipers, Pads, Pins obviously. get a squeak and pull coming from the left side, does not matter what the temp is, will do it right off the bat. gonna order new Brake hoses for the front, have read that could be the...

is there a adapter to somewhat Route the ISSPRO fuel pressure sensor at an angle so it is not right into the Coolant Hose? Possibly a braided Hose with the same Thread size?

97 F350 CCLB, was an auto but has been swapped to a manual, has a php tuner onnit but that’s all. Not sure what else to do as this thing sometimes won’t start when its mildly cold out, other days it fires right up, some it just cranks and cranks, smoke out of the exhaust, no cel, wait to start...

Have a buddy who has a 97 cclb. It has a 6" lift all around and wants it lowered down to a 4", maybe even stock. Has blocks in the rear, a RSK up front with stock springs. What all is needed to get it there? Front shackles, u bolts, trac bar, different rear block, sway bar links, tires and...

Changed the brake pads and hardware today, everything went smooth although I noticed when I turn hard left I get a soft brakemped, turning right and going straight the truck stops great, any ideas? Kind of stumped. Oem stuff also

04 6.0 with a later model engine in it all stock no tuner driving down the road running fine then pulling up to a light truck had no throttle response and started running rough, shut the truck off and now wont restart koeo shows a p2285 injector control pressure circuit low other then that...

best place to get a 5" cat back exhaust with no muffler

looking at picking up a 53 foot enclosed goose neck car hauler and am second guessing if my truck can handle it, 2015 F250 6.7 obviously single rear wheel CCLB , its the basic model with no upgrades, im not sure of the weight of the trailer yet, but it would haul 3 baja bugs in it along with...

was driving back from lowes and started to have no throttle response, stopped and shut the truck off to maybe reset the system and even disconnected the batteries, now the truck wont start at all, dumped 5 gallons in just in case and still get nothing haven't scanned for codes yet, i will have...

im sure this has been answered before but does CA require a 04 6.0 to have a CAT to pass smog? thinking of getting a better exhaust system for it but noticed it does not come with a CAT on it.

have a beans E fuel kit on my truck , lately i have noticed when i drive / get into the throttle the fuel pressure drops, don't remember noticing that before, towed this past weekend and dam near ran the truck out of gas a few times due to zero fuel pressure and have it build back up put a new...

long story short i drilled the hole for the probe in the manifold to big , took the probe out of my other truck as it is not being used and ended up bending it :fustrate: gonna order a new thermo coupler and need to make sure the next size up is the 1/4 npt one i need i use isspro

noticed awhile ago that my fuel wheels 18x12 have a valve stem on the inside and outside of the wheel/tire , i have no experience with fuel stuff so what does this mean? i have toyo open country AT 2 extreme.

Welp today i acquired a 2015 F250 xlt from a family member, this is a huge first for me and am wondering what the main issues are that arise with these things? it is a cclb painted black, bone stock 2wd and only has 24K miles on it, i plan on towing with it maybe a few times then getting rid of...