Search results

  1. ghohouston

    Needed- 7.3 42 pin connector- male/ truck side, not engine

    Anyone on here have a 42 pin connector and harness laying around they'd sell? The harness and connector that connect TO the 42 pin engine harness, not the engine harness part itself. Looking for the connector with wires and pins in tact, only need 6-8 inches of the harness out of the connector...
  2. ghohouston

    Anyone ever seen this turbo outlet?

    I came across this pic on a facebook listing, and wondering wtf setup this is out of. Worked on a whole bunch of 7.3's over the years and never seen this. The top part of the downpipe appears to be one with the exhaust outlet housing. The rest of the turbo seems like a normal late 99 setup.
  3. ghohouston

    Those who have gone to 2005+ axles

    Guys, I am finally getting some progress made on swapping an 07 suspension into my 97. I have a few questions regarding braking. For the rabs valve, did anyone do anything to/ with it? Modify, got rid of it, etc? I'd like to hear anyones experiences. I swapped over to the F Superduty hydroboost...
  4. ghohouston

    42 pin connector tool

    Does anyone have a link to a pin removal tool for the 42 pin engine harness connector? Does it use the same removal tool as Deutsch connectors? Going to be swapping a pristine early 99 engine harness into my obs and I'm sure will need to move a few wires around.
  5. ghohouston

    Bnib bellowed up pipes/ ebpv ****** pedestal

    Brand new never installed Bar None Diesel bellowed up pipes and ebpv ****** pedestal for 94.5-97 Obs 7.3. Buddy bought these for his truck a few years back, ended up rolling the truck so the parts were never installed. Asking $420 shipped to the lower 48 for all of it.
  6. ghohouston

    Mac 35th anniversary toolbox

    Selling my Mac 35th anniversary toolbox. Rough dimensions are 5.5 feet wide and 6 feet tall. These measurements don't include the locker bolted to the side. This box is 49 of 300. Has enough room for any tech's tools, it just collects dust. Cash only, no trades at this point. Craigslist link...
  7. ghohouston

    Obs F350 4:10 geared D60 and 10.25 rear end

    Pulled both axles out from my 97 F350 srw truck as I'm swapping to an 05+ suspension. Front passenger wheel bearing froze in place. It is probably going to have to be cut off. When I tried removing the axle nut, the axle nut socket just rounded out the 1/2" input on the socket. The stub shaft u...
  8. ghohouston

    Obs factory Alcoa 16" rims

    Factory 16" Obs Alcoa rims. Come with the crappy tires still on them, as well as all 4 center caps. Rims are in fairly good condition as are the caps. Looking to sell local in the Dfw area. Link to Craigslist ad that has pics is below. Price is $475. Not looking for any trades at this time, cash...
  9. ghohouston

    Kileen, Tx./ Ft. Hood Help needed asap

    If anyone is in the area that has a good scanner and or knowledge of 6.0's, I have a guys daughter with an Excursion that is broke down.
  10. ghohouston

    Obs dash question

    Some ****ing clown decided to break into my 97 to steal the head unit out of it. And of course, they used a freaking pry bar, and broke the dash pad, radio frame/ bezel, as well as the skeleton of the dash behind it. Does anyone know if these pieces are replaceable? I haven't had the time to...
  11. ghohouston

    Need late 99 up pipe collector asap

    Working on a truck that came from the wonderful salt land, and the up pipe collector cracked upon removal of one of the up pipe bolts. Need a late 99 collector if anyone has one. Also needing an e.b.p.s. tube and fitting that goes into the manifold, as they broke as well.
  12. ghohouston

    Free 7.3 block

    Does anyone want a free 7.3 block in North Texas (Lewisville)? Needs to be rebuilt. Has been sitting for about 10 years, was pulled due to low compression. 2002 model motor. No injectors, h.p.o.p., plenums, or turbo. Still has a good front cover, exhaust manifolds, cam, crank, and heads. Iirc, I...
  13. ghohouston

    Front wheel bearing seized

    Guys, on my 97 4x4, the front passenger side wheel bearing seized up while driving, and the but is also seized. Due to the depth of the hub, I really cant get a torch in there to cut the nut off, or anything like a punch/chisel. Axle nut socket just ends up coming off (stripping/ beginning to...
  14. ghohouston

    Need advice asap

    Pulled dash on a 6.4 yesterday to replace heater core. Truck started and ran fine before. Got all back together, and the ignition will not do anything, moves about 1/4 turn. I have quadruple checked all connectors, and the grounds in the passenger kick panel. The cluster does not come on or...
  15. ghohouston

    Kenda tires

    Anyone used Kenda tires? They seem to be decently priced, and have decent reviews. Looks like Cooper owns them.
  16. ghohouston

    Carrier bearing shim?

    My 97 CCLB 4x4 has a driveline vibration. Rear u joint is bad, going to replace it. I also noticed my carrier bearing has a shim, probably 1/8th inch. Truck is stock height/suspension. Having not worked on many obs trucks, im wondering if some idiot field hand where i bought the truck from did...
  17. ghohouston

    Hfcm filter

    Does anyone have a link, or possibly know a store that sells only the hfcm filter? Don't need the upper filter. Don't really want to buy the motorcraft kit with both, as this is on my obs 7.3 with a 6.0 hfcm for e fuel, so literally no use for the upper.
  18. ghohouston

    38 gal. Sending unit

    Found a 38 gallon plastic super duty tank on the side of the road in front of a scrapyard, so got one for free. Had no sending unit or sending unit locking ring on it though, so needing to buy a sending unit and locking ring.
  19. ghohouston

    Window deflector residue

    What would you guys recommend using to remove the adhesive residue from what are probably 20 year old window deflectors?
  20. ghohouston

    Lpfp question

    On these trucks low pressure pumps, how is the fuel regulated? Looking into installing one of these on my obs. Need a new fuel pump, and a pre filter setup. I do have a riff raff frx on the truck, not a normal regulated return, but serves the same purpose. If this needs to be posted in the 7.3...

Random media

IMAG0583
motor
194211_4064729304775_152922196_o
dodgefail
IMG_0459
3
screenshot
k_p_s51_6_7_oil_filter
Lite
carli_BMF2
ex_long_block
Screen_Shot_2015-10-06_at_11_43_19_PM

Latest posts

Members online

No members online now.
Total: 455 (members: 1, guests: 454)
Top