Go Back   PowerStrokeArmy > Power Strokes > Excursions

Reply
 
Thread Tools Display Modes
  #41  
Old 08-06-2017, 05:20 AM
Back woods Back woods is offline
Private
Member's Gallery
 
Join Date: Mar 2017
Posts: 14
Default

Recently did this with one of my F350s, has 315 Duratracs that were rubbing even with 4" lift. Basically I copied the ORD zero rate design, truck is a 2001 BTW. Anyways, the max a stock axle can be moved forward without relocating the trackbar etc is 1". At 1" there are some clearance issues with the front diff and track bar mount. Nothing that cant be ground down to clear. The very top center diff cover bolt needs to come out to clear the engine cross member. It is basically a 1" block so I pulled a few leafs from the lifted front pack to give it stock lift/better ride. Right now the truck sits lower than stock with 315 Duratracs. With the front axle moved forward it clears lock to lock with only a little rub on the leaf springs at lock.

Love the look, everyone thinks its about to smash into the fenders when I pull into somewhere with the wheels cranked, never does.

Before


After

Last edited by Back woods; 08-06-2017 at 05:22 AM.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:56 PM.

 

Powered by vBulletin®
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

Designed by Military Ltd