Need a little help with exhaust delete

stevens6.7 · Dec 5, 2013

So I am getting closer and closer to fully deleting my truck ( just need EGR, and waiting for the no limit intake). I can't find the thread but remembering reading some guy asked about the sensors on the factory exhaust and what to do with them. I forgot his exact wording but once I take my factory exhaust off besides installing the new stuff is there anything special I need to do with these sensors and such?

Powerstroke_fan · Dec 5, 2013

I think it depends on which tuner you will be running. With H&S they are just unhooked.

stevens6.7 · Dec 5, 2013

I'll be running a Mini Maxx with a 5" Flo Pro. Do the sensors need to be tucked away or complete pulled out? Yes I am a newb to this stuff.

josh@thedieselcartel · Dec 5, 2013

Just unplug the sensors before you take out the dpf. They will come out still threaded into the DPF. Tuck/ZipTie the remaining plug/harness up and out of the way and good to go.

stevens6.7 · Dec 5, 2013

InMotionJosh said:
Just unplug the sensors before you take out the dpf. They will come out still threaded into the DPF. Tuck/ZipTie the remaining plug/harness up and out of the way and good to go.

Thanks Josh!

RedRice589 · Dec 5, 2013

InMotionJosh said:
Just unplug the sensors before you take out the dpf. They will come out still threaded into the DPF. Tuck/ZipTie the remaining plug/harness up and out of the way and good to go.

Put dielectric grease in the plugs and tape them over so they don't corrode also

helps if your putting back to stock. And keeps crap out if your up north.... Some people don't live in Florida Josh LOL

dsberman94 · Dec 5, 2013

RedRoce589 said:
Put dielectric grease in the plugs and tape them over so they don't corrode also helps if your putting back to stock. And keeps crap out if your up north.... Some people don't live in Florida Josh LOL

Gotta do this with the 6.4

josh@thedieselcartel · Dec 6, 2013

stevens6.7 said:
Thanks Josh!

Your welcome, and let me know if you need any parts to complete your install.

RedRoce589 said:
Put dielectric grease in the plugs and tape them over so they don't corrode also helps if your putting back to stock. And keeps crap out if your up north.... Some people don't live in Florida Josh LOL

Yeah this is a good point

Wheres the palm tree and sun smilies when I need them :doh:

Cratos · Dec 6, 2013

so are you saying you have the cap plugs for the harness???

stevens6.7 · Dec 6, 2013

RedRoce589 said:
Put dielectric grease in the plugs and tape them over so they don't corrode also helps if your putting back to stock. And keeps crap out if your up north.... Some people don't live in Florida Josh LOL

Any special tape to use? I'm in Texas so it's like Florida LOL.