Search results

Motor craft 15 40

I went to try the test today but before I tried I wanted to see if I could make it miss without any load. So I pulled it up a stone pile nose first and held it at 2,000 rpm for about one minute and it didn't miss. Jumped out real quicke and pulled stick and it had clusters of bubbles on it. Is...

Ok thanks il give it a try

Have been chasing this problem on my 2006 psd 6.0 and I think I got it figured out. I think I may have created the problem. I bought a truck wrecked and oil pan and windage tray that holds the pick up tube we're damaged. No big deal changed them both truck started idled fine good to go I...

Well still messing with the truck after work. Pedal is fine nothing wrong with it also my dsd rpm is fine as well. Still no luck My fuel pressure is good I even pulled lines and banjo bolts to headline to make sure they are clear. I pulled a trailer home today or should I say attempted and it...

Just an update Marty hasn't messed with it yet. But I have checked for updated stc it does have it. Dsd icp and actual are good I did put in a new injector harness cause it was chaffed threw in a spot. It did help some I have also put in new ipr cause when I was reading pids it jump for a sec...

Yeah I think it is the ficm as well. I heard some about reading 48 v but the injector drive side being bad.

Got Marty picking it up tired of fooling with the truck!!!

Yes took off ficm looked at pins they were fine mad sure tabs on each side clicked.

Just checked edge cts came up with 2 and 8 contribution. No one can help?

Update put a new lift pump on. Ran great for about 34 miles of my 37 mile ride home From work. Was going up a slight incline didn't miss so much but would loose power then come back suddenly I did see vgt jump around from 50 to 40 at About 65 app.

Also icp pressure is at 3700 even while missing at wot

Checked vgt cycle was at 52% when I had the problem. The maf I didn't have the voltage I was checking with edge cts but seemed to be reading normal didnt drop suddenly or raise up suddenly. Map pressure seemed to be correct with boost pressure. I did notice icp pressure vs. voltage seemed to off...

Yes with the tune. The tune is off now. Should vgt duty cycle be at about what percent? I will check ficm today.

Yep that's the bolts!! Just googled exploded view of injector. Any idea on the surging?

This is my first post so here it goes... I need help with diag I have a 2006 6.0 f350 with p max 5" exhaust . I bought the truck wrecked hit in the front and had a dent in the oil pan also broke the upper oil pan that the pick up tube bolts too. It had oil in the pan when I got it started and...