Search results

  1. P

    Low engine oil level warning

    Anyone know what logic the ECM uses to determine oil level on a 2011 6.7? We have a truck that is showing the message constantly but from what I can find there is no level switch or sensor. Just the engine oil pressure switch is all I can find.
  2. P

    upgrade non vgt

    Duramax VGT on a 6.7 powerstroke. Never would have thought of that one, but I guess the upipes(or whatever they are called on a 6.7) are a pretty close fit.
  3. P

    2014 sd?

    There have been a few class 8 trucks with aluminum frames over the years. They don't take well to heavy bodies though (wreckers, dump trucks, etc.).
  4. P

    tranny warranty questions?

    It depends on the builder, but most shops will not warranty broken shafts or damage caused by a shaft letting go. If you could prove that a bearing siezed or something happened to the converter cause the shaft to break then you might have a case for warranty. If it was broken due to power or...
  5. P

    hpfp install, in cab

    If you have never done it before, I would suggest splitting it up over two days. It should only take around 8-10 hours but it sucks royally working with the cab on.
  6. P

    Cobbs Diesel Performance

    Cobbs is about 30 minutes away from us. Performance machine, cobbs, rebel diesel performance, they are all the same. If he did not have daddy's money backing him he would have been gone a long time ago.
  7. P

    Truck Jam Piedmont Dragway Oct. 20th

    Sorry man, but those trucks don't have "cheetah" turbos on them. They may have a different compressor wheel stuffed in them, but there is nothing from Fleece on any of the three trucks. I pull against them often and they regularly put 20-30 feet on my stock turbo/injector duramax. They...
  8. P

    Swamps CR 7.3

    With a good tunable CR platform the 7.3 could make a lot more hp on stock parts since you can make power much higher in the rpm band. I would say that a stock long block with studs could live at 600 reliably as long as you tuned it correctly.
  9. P

    With H&S MCC coming think IDP will tune on H&S

    there is a serious cost factor to think about, you have to purchase a mini or black maxx then pay $199 for a license to tune it (I think that is right). That means for a tuner to make any money on their tunes it would probably cost $2000-$2500 for a setup.
  10. P

    6.0 pushing coolant

    Did you use OEM headgaskets or the black ones?
  11. P

    * TS 2012 Official Drag Race thread *

    We broke an input shaft about 30 ft. off the line during qualifying for pro-street. It shook the truck so hard the throttle pedal broke off the firewall.
  12. P

    * TS 2012 Official Drag Race thread *

    Pro-Street entry here, but it is a common rail cummins.
  13. P

    Auto Enginuity Question

    We use AE everyday on Powerstrokes and Cummins both. I would not have anything else for a Powerstroke and it is pretty good on a cummins as well. Just remember that most things you need are in the actuations tab that is a little hard to find. For 6.0 injectors the power balance test is great.
  14. P

    2007 died while towing, crank no start

    My vote is for the STC if it has not been replaced.
  15. P

    03-early 04 icp wrench size?

    1 1/16", cut to 1.75" I believe, combine that with a wobbly and extension and a lot of profanity.
  16. P

    '05 No Start problem

    two 8mm bolts and twist and pull. The o-rings and gunk make them a little hard to pull out. if the truck runs better with the egr valve unplugged there is a good chance that the egr cooler is cracked. By unplugging the valve you keep the coolant from going into the intake and putting out the...
  17. P

    BAD NEWS on engine tick... TSB

    I bet they will do something with the oil film thickness on main/rod bearings to minimize it on future models.
  18. P

    '05 No Start problem

    does the truck still have the EGR system intact? If so try unplugging the EGR valve and see what it does.
  19. P

    BAD NEWS on engine tick... TSB

    The lb7 duramax had the same issue. that is why they dropped the oil pressure with the LLY. I have had some in the shop that sound like they are coming apart and the owners say they always sounded like that and in others it is barely noticeable. It is a diesel after all.
  20. P

    VGT on 7.3L

    The guys at empire did it back when they were Van Aken brothers racing. not sure how they controlled it, but it can be done.

Random media

Fuel_Cell
thumb_IMG_1333_1024
DSCF3418
A8048E78-433F-4A8C-B266-8513E715C997.jpeg
99.5 7.3
Superduty
Precision billet triple disc Billet input, output and intermediate shafts
new_turbo_006
eleanor_part_two_78_
Porsche
IMAG0538
td_trucking

Latest posts

Members online

Total: 585 (members: 1, guests: 584)
Top