2000 7.3 Just died and wont start.. Help!

kingranchCoy

New member
Joined
Feb 20, 2012
Messages
28
Reaction score
0
Location
San Angelo Texas
Ok, just talked to the mechanic, i totally misunderstood him, he said 50 not 15 :thumbsup:. The filter was replaced about 4,000 miles ago. I change it every 10,000 (every other oil change)
 

Arisley

Moderator
Joined
May 18, 2011
Messages
9,383
Reaction score
28
Location
Arlington, Texas
OK, fuel pressure is not the issue then.

Can they communicate with the PCM? Ask them to run a buzz test on the injectors.
 

kingranchCoy

New member
Joined
Feb 20, 2012
Messages
28
Reaction score
0
Location
San Angelo Texas
OK, fuel pressure is not the issue then.

Can they communicate with the PCM? Ask them to run a buzz test on the injectors.

Yes they can, i was there when they ran the buzz test... everything fine. Still no codes except for one time it came up with KAM error. I think that has to do with the ts chip though.
 

Arisley

Moderator
Joined
May 18, 2011
Messages
9,383
Reaction score
28
Location
Arlington, Texas
Have they tried pulling the chip and seeing if the truck will start.

KAM error means the batteries were disconnected or that the PCM lost power.
 

lincolnlocker

Well-known member
Joined
May 25, 2011
Messages
27,907
Reaction score
167
Location
Central Michigan
whoa there buddy, dont get your panties in a wad! I didnt say anything to the effect i thought he was wrong. I told him thanks for the info and i will check into it..
sorry man!! i forgot where i started too..
No problem. Thanks for giving us the chance to help. We sometimes get a little upset, sometimes people will ask for help and when we answer their questions they don't listen or they were told different and they know the other person was right because he has been a professional diesel mechanic for GM for 3 months.

Sorry for the misunderstandings and good luck. Let us know how it goes.

whs!! i shouldn't be that way though. i started the same way as him... gonna stop posting for a few days.. im going overboard on some of this stuff...
 

Latest posts

Members online

No members online now.
Top