2014 Platinum F-250 Level From Factory?

[yfz4kyle]

What up! I picked up a 2014 short bed F250 platinum a couple weekends ago. I measured front and rear and this thing is dead nuts level. I like to have my super duties sit about 1" higher in the front. So, I've always done 2.5" coil spacers on my previous Powerstrokes that were XLT and Lariat models. I did some research and read somewhere that the Platinum 250 short bed comes stock leveled? Does that sound right? What can I do to get that nose 1" higher? It does not have any sort of spacer under or on top of the front coil and looks 100% factory untouched.

 

[jimdawg185]

My 08 was level from the factory, not sure how or why. But my 17 definitely was not level. Both 250 ccsb


Sent from my iPhone using Tapatalk

 

[yfz4kyle]

My 08 was level from the factory, not sure how or why. But my 17 definitely was not level. Both 250 ccsb


Sent from my iPhone using Tapatalk

Well crap! I just want the front to sit a little higher lol

 

[Brian22]

My 16 sat pretty dead level.

Go with a 1" or 1.5" coil spacer for the front if you're after a nose high stance.

 

[sootie]

Why would you want the front higher? To blind oncoming driver's? Or just to look like you have something heavy in the bed...

 

[Jomax]

Cali lean bro.


Most 250s are level. Mine is.


Sent from my iPhone using Tapatalk

 

[yfz4kyle]

Why would you want the front higher? To blind oncoming driver's? Or just to look like you have something heavy in the bed...

It's just look that we like out here haha


Sent from my iPhone using Tapatalk

 

[yfz4kyle]

Cali lean bro.


Most 250s are level. Mine is.


Sent from my iPhone using Tapatalk

Rad guess it is what it is for now


Sent from my iPhone using Tapatalk

 

[yfz4kyle]

My 16 sat pretty dead level.

Go with a 1" or 1.5" coil spacer for the front if you're after a nose high stance.

Thanks!


Sent from my iPhone using Tapatalk

 

[04cr450]

Depends on the package it comes with. My 250 came with 350 blocks so it sat nose down substantially. Now I have the 2.5" icon lift and it's still 1/2" roughly nose down.

 

[yfz4kyle]

Depends on the package it comes with. My 250 came with 350 blocks so it sat nose down substantially. Now I have the 2.5" icon lift and it's still 1/2" roughly nose down.

Wow! Good to know! I'm thinking I might go with a 1" coil spacer if I can find one otherwise I'll do 1.5"


Sent from my iPhone using Tapatalk

 

[Swampfox]

Depending on how much you want to spend, one up offroad makes an adjustable coil leveler and you can dial it in however you want up to 2.5".

 

[yfz4kyle]

My 08 was level from the factory, not sure how or why. But my 17 definitely was not level. Both 250 ccsb


Sent from my iPhone using Tapatalk

Depending on how much you want to spend, one up offroad makes an adjustable coil leveler and you can dial it in however you want up to 2.5".

I may consider that then! That sounds like I did on my F-150 with the Icon Coil Overs