2015 injector questions

[boggerr]

Have a 15 with 185K on it and just started throwing a P1551 cylinder 1 injector circuit range/ performance code. Did some looking and what I found on it was the injector is probably going out. I’m going to check out the harness this weekend but my luck it’s most likely going to be an injector, so I’m going to replace all injectors.
Now!

Remain or new injectors and best place to get them from.... besides Ford

When either installing new or remans do they have to be programmed to the truck?

Is it only IDS that can be used if they have to be programmed or can you do it with forscan or any other device?

 

[sootie]

Yes, you need to program the injector codes found on the ccv box lid.

Alliant power injectors are good.

IDS is best but Forscan has the capability.

 

[HeavyAssault]

Yes, you need to program the injector codes found on the ccv box lid.

Are those the codes for the currently installed injectors?? I was told the new injectors will have their own code that needs to be programmed. Can you give more details??

 

[boggerr]

Thanks for the info, Sootie

Any recommended PSA vendors?

 

[sideactiondiesel]

We can flow-test balance and rebuild ANY CR injectors here at our facility let me know if or when you get them out and ship them to me and I will get the diagnosed on the bench and go from there. Lmk if we can help

 

[boggerr]

We can flow-test balance and rebuild ANY CR injectors here at our facility let me know if or when you get them out and ship them to me and I will get the diagnosed on the bench and go from there. Lmk if we can help

Thanks and wish I could do that but unfortunately I can’t tie the truck up for that long. If something changes, I’ll be in touch

 

[sideactiondiesel]

Thanks and wish I could do that but unfortunately I can’t tie the truck up for that long. If something changes, I’ll be in touch

We can also do new as well. its all up to cost/time LMK

 

[BigRed97]

Are those the codes for the currently installed injectors?? I was told the new injectors will have their own code that needs to be programmed. Can you give more details??

Yes the codes on the ccv are for the installed injectors. The new ones will have new codes with them. The pcm need the new codes programmed to the corresponding cylinder number

 

[brittonjames2000]

Yes, you need to program the injector codes found on the ccv box lid.

Alliant power injectors are good.

IDS is best but Forscan has the capability.

I have a 2014 f250 with a 6.7 where would I find in the pcm for cylinder 1 to input the new code

 

[Tiha]

I have a 2014 f250 with a 6.7 where would I find in the pcm for cylinder 1 to input the new code

Are you using forscan or ids or what program are you using?

 

[brittonjames2000]

forscan

 

[Tiha]

Forscan starts around the 4 minute mark

 

[brittonjames2000]

Forscan starts around the 4 minute mark

Thank you