20x12 on stock height trucks

[bmiller5]

How big of an issue do you guys think 12's would be with 420's on a 2003 2wd?

 

[davidyack]

Just pulled the trigger on some 20x12. -44 offset. Planning on 305/50/20 toyo all terrains. Truck is an 05 2wd with a 2"spacer In the front.

 

[07_powerstroke]

Just pulled the trigger on some 20x12. -44 offset. Planning on 305/50/20 toyo all terrains. Truck is an 05 2wd with a 2"spacer In the front.

I would leave the suspension stock I had a 2in leveling spacer and it was way to much fender gap for a street tire. Just pull back your fender liners or trim them a bit if it rubs but mine doesn't run

 

[Daryl@TDP]

I would leave the suspension stock I had a 2in leveling spacer and it was way to much fender gap for a street tire. Just pull back your fender liners or trim them a bit if it rubs but mine doesn't run

That 2" spacer might put that 2wd truck where yours say stock being a 4x4.

 

[Josh@DirtyDiesels]

Leave it stock and see if it works. I think stock 2wd is about the same height in the front as my lowered 4x4 and I clear 12's with 305's fine

 

[Frank_C]

Just got my 20x12's with 305/50/20 420s on today. With 4400lb coils up front. Barely touches the fender liner at full lock, so I'm fine. No need to trim anything on mine

 

[pog]

-44 offset?

 

[Frank_C]

Mine are -40 if I remember correctly. Having trouble finding it online right now lol

 

[Daryl@TDP]

Stock height with pmf short arm 4 link and 20x12 moto metals with 305/50 420s

 

[MINK]

View attachment 18125
View attachment 18126
View attachment 18127
View attachment 18128

Stock height with pmf short arm 4 link and 20x12 moto metals with 305/50 420s

ugh I need that 4-link, shoot me a text and let me know how he likes it.

 

[strokinKR]

Thanks man

EEEEEHHHHHH powered by this (╯°□°)╯

What # spring up front and what rear block is this?

 

[bigrpowr]

What # spring up front and what rear block is this?

his are 4400# , i have the part number if you need it.

 

[6.4stroke]

If only pa wasn't so anal about wide tires I'd probably bump up to 20x12. They look mean

 

[Strokin6.4]

What # spring up front and what rear block is this?

The picture you quoted I believe was stock f250 springs and blocks.

Sent from my SCH-I535 using Tapatalk 2

 

[strokinKR]

his are 4400# , i have the part number if you need it.

Ok that would be great. And are you positive that's what they are?

 

[bigrpowr]

Ok that would be great. And are you positive that's what they are?

thats what hes running now iirc.

 

[strokinKR]

thats what hes running now iirc.

Would I run no block in rear to make it level? Guess I need a pic of his curre.nt setup

 

[SEABEE08FX4]

Just dont take out the overload leaf unless you have traction bars.

 

[strokinKR]

Just dont take out the overload leaf unless you have traction bars.

Gotcha. I don't plan on it as I tow everyday.

 

[Mike@MPD]

Sent from my SCH-I545 using Tapatalk 2