6.7 issues

[Short Bus]

ive got 2011 cab and chassis that i pulled the cab and worked on. Got it all back together and have no communication with the pcm or tcm. The scan tool will communicate with the hvac module, body control module, tpms module and iirc the abs module. Ive checked and cleaned all connections that i have had apart, fuses and pcm power relay. I cannot find a pin out of the 3 connectors on the pcm, would anyone have those diagrams handy so that i can verify power and grounds at the pcm? anyone have any suggestions or tips of other things to check? I havent worked on many 6.7's, more of a 7.3 and 6.0 guy...

 

[sideactiondiesel]

connector by the driver side fenders check these. make sure no debris or dirt re latch and test.

 

[Short Bus]

connector by the driver side fenders check these. make sure no debris or dirt re latch and test.

Ill look at those again. thanks

 

[Short Bus]

Took off to the harvest crew last week and just now getting back on this. Anyone else have any suggestions?

 

[Short Bus]

I am not finding any pin outs on the pcm connectors online or on the prodemand diagnostic site i pay for. would any one have a way to look those up and post the pin outs? im at a dead end with this, prodemand hasnt been much help at all.