6.7 mod list

gnxtc2 · Sep 29, 2021

Time to start upgrading my 2016 F350. What are must must haves to be done.
Have a blank EZ Lynk coming to me. Need some advice on what to load onto it.

Already have OUO traction bars, airbags and wireless airbag controller.

BTW, Facebook killed these boards. I used to live on these boards, so much useful info here.

Thanks

Billy T.
[email protected]

DEEZUZ · Sep 29, 2021

Facebook didn't kill these boards, lazy ****s that use Facebook killed these boards.

I suggest a disaster prevention kit on the fuel side

Strokersace · Sep 29, 2021

Weight loss underneath at least, air intake, instructions for computer to assist. Depending on what you’re wanting to use the truck for, maybe a drop in turbo.

Otherwise be done and enjoy. “Stock” under the hood (except for the intake).

If you’re into aesthetics, do an upper end weight loss, piping kit, ccv reroute, etc.

Black AOD · Sep 29, 2021

CTC DEEZUL said:
Facebook didn't kill these boards, lazy ****s that use Facebook killed these boards.

I suggest a disaster prevention kit on the fuel side

:whs:

the S&S gen 2 kit is really nice

harrelljr99 · Sep 30, 2021

Black AOD said:
:whs:

the S&S gen 2 kit is really nice

Ditto

Sent from my iPhone using Tapatalk

jeremiahmercier · Oct 7, 2021

gnxtc2 said:
Time to start upgrading my 2016 F350. What are must must haves to be done.
Have a blank EZ Lynk coming to me. Need some advice on what to load onto it.

Already have OUO traction bars, airbags and wireless airbag controller.

BTW, Facebook killed these boards. I used to live on these boards, so much useful info here.

Thanks

Billy T.
[email protected]

At least we're in the same boat lol, now we both have 6.7s, mine is a 17 though. Still got that OBS?

Sent from my SM-G998U using Tapatalk

gnxtc2 · Oct 7, 2021

jeremiahmercier said:
At least we're in the same boat lol, now we both have 6.7s, mine is a 17 though. Still got that OBS?

Sent from my SM-G998U using Tapatalk

Yep, still have the OBS

Billy T.
[email protected]

jeremiahmercier · Oct 8, 2021

gnxtc2 said:
Yep, still have the OBS

Billy T.

[email protected]

Miss mine, but the 6.0l was a huge improvement over it, and of course the 6.7l is huge over the 6.0. Glad to hear you still have the ole girl! One day I'll have another, but as a toy only lol.

Sent from my SM-G998U using Tapatalk

KBMKVIII · Nov 12, 2021

First thing, get rid of the plastic IC pipe.
Check out smeding for the pipe.
Otherwise, weight loss top and bottom .
Intakes are good but expensive.
I just run a factory filter with some holes in the bottom of the air box and removed silencer.
These newer trucks have axle wrap pretty bad so a set of bars is real nice.
Have not yet added bars to my ‘16 yet but I need them.
I did a low temp thermostat as well.
I did not like how high the factory temps were.
Don’t care if they are “fine” they were not to my liking.
The pse thermostat helped remedy this.
Otherwise, check your body bushings.
They may look good but are soft as cake.
Carrier bearing is worth looking at as well.

97stoker350 · Nov 12, 2021

Don't forget some 33x12.50r24 with 24x18 wides that should really do it up nice.

KBMKVIII · Nov 13, 2021

97stoker350 said:
Don't forget some 33x12.50r24 with 24x18 wides that should really do it up nice.

Don’t know how I missed that one.
That’s obviously the most important lol.

NEVRNF · Nov 14, 2021

I just sold my 2011 CCLB SRW truck and bought a 2016 Tow Boss F350 Dually. I am about to do all the usual preventative measures.
KBMKVIII is the Full silicone hose as good as the H&S setup?

KBMKVIII · Nov 14, 2021

NEVRNF said:
I just sold my 2011 CCLB SRW truck and bought a 2016 Tow Boss F350 Dually. I am about to do all the usual preventative measures.
KBMKVIII is the Full silicone hose as good as the H&S setup?

It’s a high quality piece.
The silicone is very thick with a good few layers of reinforcement.
I have no complaints whatsoever

gnxtc2 · Nov 14, 2021

KBMKVIII said:
It’s a high quality piece.
The silicone is very thick with a good few layers of reinforcement.
I have no complaints whatsoever

Although the silicone is thick, the silicone hose could expand prior to feeding the motor with pressurized air.

I could see where something that doesn't see high pressure (ie: coolant) where a silicone hose would work.

Billy T.
[email protected]