Reply to thread

Message: [QUOTE="Powerstroke Cowboy, post: 178574, member: 610"] I have a HX55 Turbo. That as of now has a 25CM T6 Housing... The turbo (in the specs) has a 86mm inducer and 80mm exducer Turbine wheel. I am looking to go with a smaller housing. And I found a company that will machine a 1.10 A/R S400 T4 exhaust housing to fit the wheel on the HX55. All they want is 100 Bucks for the housing and to machine it. I think that is a fare price Now would that 1:10 A/R T4 housing be to laggy of a housing??? Would it spool good enough to be a DD turbo and tow with it??? Or do you think I should go smaller yet??? The MAX boost this turbo will see will be 25 to 30 PSI if I go compounds. And that is the plan.. SO could I get away with the .90 A/R ???? They know for a fact the 1.10 Wall clamp onto the HX55. ust needs machined to fit the wheel.. BUT they migh also have .90 A/R and 1.00 A/R housings, That they think "might" clamp on th the HX55. ALL these housing are off a S400 Frame turbo.. I guess how close would the 1.10 A/R be to a 19CM housing???? Thanks for the help!!! [/QUOTE]

Verification

Random media

IMG_20140823_242754_948

Kazakhstan

2012-01-13_15-14-37_200

P1060062

2012-08-11_19-04-01_978

First money binge.

Always changing to make it a home on the road.

Latest posts

A few turbo questions and a rant
- Latest: 6.0 Tech
- 23 minutes ago
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Today at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Today at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Yesterday at 7:03 AM
Southeast US
Ford 7.3 Passenger Bank Dead
- Latest: Powerstroke Cowboy
- Monday at 8:20 PM
7.3 Tech

Members online

Total: 1,227 (members: 5, guests: 1,222)

Top