• 1) What are you selling?

    2) What is its condition?

    3) Where are you located?

    4) What is your asking price?

    5) Pictures/videos?

    6) At least 3 days between bumping your own ad.

    7) No more than 5 ads per individual at once.

    8) No commercial sales.

    9) You must post when the item sells and state that it is SOLD. Do not report the post or PM moderators to remove your post once it is sold.

    10) No feeler ads.

    11) No firearms or firearm accessories.

96 F-250 SuperCab (2wd) 185k PART-OUT

Copperhead

Member
Joined
Feb 5, 2012
Messages
118
Reaction score
0
Location
Pikeville, KY
I have a fairly clean, virtually rust free, southern truck that I've decided to Part Out.

I originally bought it with the intent of doing a full body-off-frame resto to it,.....BUT,....I found a low mileage truck that was ready to go,.....hence the reason for my sale.

I've parted out several F-150's (specifically 1st Generation Lightnings),....BUT,... this will be the first F-250 PowerStroke that I've done.

With that being said,....... If there's any items that you're interested in, let me know & make me an offer on the said item(s),....and we'll go from there.

I'm willing to ship every single part,....even the heavy stuff,....like the engine, trans, rear-end and etc,.... The only items I would NOT consider shipping would be body panels, bed, frame, fuel tanks and such,....

You can respond here, via PM on the forum.....
OR,.....
email me at [email protected]

OR,...
Call / Text 606-477-7327

13139158_996414607074044_8142451389892228462_n.jpg


13151567_996414623740709_4232803194426664733_n.jpg


13119113_996414637074041_5670543761944365116_n.jpg


13177732_996414657074039_6066674183271074437_n.jpg


13179115_996414677074037_1121245594183847750_n.jpg
 

bluedge8

Active member
Joined
May 18, 2011
Messages
3,879
Reaction score
0
Location
Champlin MN
How much for the wiring harness from the ecm out to the engine, assuming it is in good shape at the ecm connection.
 

ncollins64

Well-known member
Joined
Nov 13, 2012
Messages
4,522
Reaction score
69
Location
winchester springs, tn
Are the doors rust and dent free? Was it an xlt with power windows and locks? What about the bed being in the same condition? Glow plug module in the dash?
 

Copperhead

Member
Joined
Feb 5, 2012
Messages
118
Reaction score
0
Location
Pikeville, KY
Are the doors rust and dent free?

The doors appear to be rust free,.....BUT,... the drivers door has a dent about twice as big as a quarter, near the edge, close to the key hole area.

Was it an xlt with power windows and locks?

Yes,.....It's an XLT model w/ Power Windows & Locks.

What about the bed being in the same condition?

The bed is in decent condition, BUT,.... It does have a scrape on the right side over the wheel-well. Not bad though. If you zoom in on the pic you might be able to see it.

Glow plug module in the dash?

Yes,...... all of that is still intact.

Also the auto trans harness and the steering column?

Yes,..... Still available.



Column (complete) - $100
Auto Trans Harness - $50
Bed - $400
Tailgate - $100
Doors - $100ea,...... OR,....$175 for both

These prices DO NOT include shipping. BUT,.....There's no shipping on the big items like the Bed or Doors anyway.
 
Last edited:

Copperhead

Member
Joined
Feb 5, 2012
Messages
118
Reaction score
0
Location
Pikeville, KY
Engine harness is sold? How about the rear tank fuel pick up assembly? Horn pad?
Yes, ..... I shipped the main harness out today.

The horn pad is available and in good condition. Switches are functional and nothing is cracked or torn.
$45.00 shipped

I'll have to check on the rear tank pick-up assy, as I pulled the tank a while back. I can't remember the condition.
.
.
.

Sent from my SM-G900R6 using Tapatalk
 

csxpaid

New member
Joined
Nov 10, 2013
Messages
5
Reaction score
0
how much for the front spindles with backing plates? Coil Spring towers?

What are the condition of these items?
 

Copperhead

Member
Joined
Feb 5, 2012
Messages
118
Reaction score
0
Location
Pikeville, KY
how much for the front spindles with backing plates? Coil Spring towers?

What are the condition of these items?

The spindles are spoken for and the backing plates are junk. I swapped those out to another truck I had.


The Coil Spring Buckets / Towers appear to be in good shape. No rust or rot present.
 

Copperhead

Member
Joined
Feb 5, 2012
Messages
118
Reaction score
0
Location
Pikeville, KY
how much for the coilsping towers?

Well,......
After seeing what aftermarket ones go for (EX: LMC lists them for 70 ea), I would let the pair of these go for $50

Shipping would be a flat rate of $20

My PayPal is [email protected]


I can remove them this weekend,....and ship out on Monday. Tracking # to follow by 9am that same day.


Let me know,....
 

rpm-inc

New member
Joined
May 18, 2011
Messages
988
Reaction score
0
Yes, ..... I shipped the main harness out today.

The horn pad is available and in good condition. Switches are functional and nothing is cracked or torn.
$45.00 shipped

I'll have to check on the rear tank pick-up assy, as I pulled the tank a while back. I can't remember the condition.
.
.
.

Sent from my SM-G900R6 using Tapatalk

You get a chance to check out the rear tank sender?
 

Latest posts

Members online

Top