After market HPOP

Crowerstroke02

New member
Joined
Mar 20, 2014
Messages
53
Reaction score
0
Location
Brandon,fl
* honey badger jr* from dyno proven will run 300/200 no problem. I have seen it first hand with 300/200's. I personally run 238's with honey badger jr and swear by that pump
 

V-Ref

Active member
Joined
May 21, 2011
Messages
1,028
Reaction score
0
Location
9 miles high @ 550 mph
* honey badger jr* from dyno proven will run 300/200 no problem. I have seen it first hand with 300/200's. I personally run 238's with honey badger jr and swear by that pump

Crowerstroke02- do you have PW/DC/ICP #'s to share with the OP on your experiences with those 300/200s and the Badger Jr?
 

TyCorr

New member
Joined
Jun 23, 2011
Messages
15,461
Reaction score
0
That overdrive is tempting vref...A t500 and that would be sweet.
 

PABowhunter

Member
Joined
Sep 18, 2012
Messages
715
Reaction score
0
Are there any vendors that can get BTS duals? Or do you have to go directly through BTS? How much $ do they run?
 

emev0l

New member
Joined
Nov 26, 2013
Messages
309
Reaction score
0
Lincoln locker adrenaline has like 65% DC with stage 2's

I've never ran one but everything I've heard were 65% if it can even hold 3,200 at all.

Whats letting his hold 3,200 at 20% ?
 

thuglike

Active member
Joined
May 21, 2011
Messages
1,642
Reaction score
0
Location
Linden, NJ
I'm not knocking the honey badger jr . I think it's a good pump but I feel 300/200s would be too much for it.

We would never recommend the Jr. for those sized injectors. We have seen real good results from testing but for day in day out driving the 1 product on the market right now I would recommend.... Termy Duals
 
Last edited:

thuglike

Active member
Joined
May 21, 2011
Messages
1,642
Reaction score
0
Location
Linden, NJ
Copy and paste post from an earlier thread:



Some notes from Jonathan........

300/200 P.I.S. injectors

Honey Badger Jr. pump

Jonathan tuning (PW was set to 3ms)

Calling for 3000 psi at wot..

Pump help 3000 psi at 55% dc

Truck did 588 on the dyno

Next.........

Upped the PW to 3.4ms

Called for 3000 psi at wot

Pump held 2850 psi at 58% dc

truck did 596

next...............

upped PW to 4ms

called for 3000psi at wot

pump went to 3000 psi then fell off the table to around 1800 (then again, every medium oil pump we tested did this)
__________________
 

MossBack

Member
Joined
Aug 22, 2011
Messages
934
Reaction score
1
Location
UTAH
Copy and paste post from an earlier thread:



Some notes from Jonathan........

300/200 P.I.S. injectors

Honey Badger Jr. pump

Jonathan tuning (PW was set to 3ms)

Calling for 3000 psi at wot..

Pump help 3000 psi at 55% dc

Truck did 588 on the dyno

Next.........

Upped the PW to 3.4ms

Called for 3000 psi at wot

Pump held 2850 psi at 58% dc

truck did 596

next...............

upped PW to 4ms

called for 3000psi at wot

pump went to 3000 psi then fell off the table to around 1800 (then again, every medium oil pump we tested did this)
__________________


That is what i was thinking of... sorry for interrupting it as ok for daily use.
 

cjfarm11

New member
Joined
May 24, 2012
Messages
51
Reaction score
0
Termy Twins. Thats my next move. Even with 250's i dont think the T-500 is enough.
 

2000wa250

Active member
Joined
Oct 15, 2011
Messages
1,048
Reaction score
0
Twins here, only downside is your low pressure pump better be in good shape because these babies need a lot of oil moved to them. My low pressure oil in the res drops to 12-15psi under any throttle with them so clearly my lpop is done.

Sent from my SCH-I545 using Tapatalk
 

bruce

Active member
Joined
Jun 19, 2011
Messages
2,789
Reaction score
0
Location
Middle east
billet stealth FTW, it was a tough pill to swallow at the time but it seems to be an alright decision these days
 

Arisley

Moderator
Joined
May 18, 2011
Messages
9,379
Reaction score
26
Location
Arlington, Texas
Your Adrenaline can hold 3,200 PSI at 20% duty cycle with 250/200 single shots on a hot tune for 12 seconds?

I'm not saying it doesn't but I've never heard of one doing that well.

Just checked it this morning, starts at about 20%, quickly goes up to about 60%. By 12 seconds or so, it is only holding 2900 lbs.

That's impressive. Do you know the PW being called for on that tune?

Not sure on the PW. My scangauge only monitors two things at once.
 

emev0l

New member
Joined
Nov 26, 2013
Messages
309
Reaction score
0
Just checked it this morning, starts at about 20%, quickly goes up to about 60%. By 12 seconds or so, it is only holding 2900 lbs.



Not sure on the PW. My scangauge only monitors two things at once.


That sounds more like it, thanks for checking for us.
 

Latest posts

Members online

Top