Anybody got 20x14 on leveled/lifted?

[David S.]

Thinking of going with a 20x14 or 22x14 on 35's, just wanting to see if anybody has that setup

 

[powerstrokin15]

Thinking of going with a 20x14 or 22x14 on 35's, just wanting to see if anybody has that setup

josh mink is about to throw his 22x14s on at 4" with 35s.


Sent looking at my blown up 6.4

 

[noopS]

Im curious as well to see this . Need some good flares since they will have some serious poke past the fenders

 

[2010 6.4]

Would love to see pics have been thinking this as well

 

[Ad8 PRODIGY]

Holy chit David I haven't see you on here in forever.

14 is fuggin WIDE tho. Curious to see it. In for pics.

 

[WILD_PHIL]

In for pics as well. Not going this route, but something around the same width.

Sent from the cabin of my Boeing 6.4

 

[bigrpowr]

Only josh would do such a thing.

 

[powerstrokin15]

Only josh would do such a thing.

:whs:


Sent looking at my blown up 6.4

 

[Josh@DirtyDiesels]

:whs:


Sent looking at my blown up 6.4

or this Josh...

to the OP: http://powerstrokearmy.com/forums/showthread.php?t=26612

might find some useful info in there even though it is titled on stock height

 

[powerstrokin15]

or this Josh...

to the OP: http://powerstrokearmy.com/forums/showthread.php?t=26612

might find some useful info in there even though it is titled on stock height

ohhh haha. my bad. thought he meant mink.


Sent looking at my blown up 6.4

 

[SEABEE08FX4]

You could do it as long as you never had to make a turn, I just took my 20x14's off this week and replaced them with some 22x10's. I couldn't go any taller than a 34 without major rubbing, I ran 355/50R20 ( 34x14.50x20 ) and this was on a 6" lift. You can get the same wide stance look your going for with a 2.5" kit and some 12 wides and 13-13.50 wide tires. I'll be selling these 22x10's soon for a set of 22x12's since I just dropped it down to a leveling kit to achieve the same look as I had with the 14's. I was just tired of the lift and 5 point turns LoL.

 

[PTSUPERD]

You could do it as long as you never had to make a turn, I just took my 20x14's off this week and replaced them with some 22x10's. I couldn't go any taller than a 34 without major rubbing, I ran 355/50R20 ( 34x14.50x20 ) and this was on a 6" lift. You can get the same wide stance look your going for with a 2.5" kit and some 12 wides and 13-13.50 wide tires. I'll be selling these 22x10's soon for a set of 22x12's since I just dropped it down to a leveling kit to achieve the same look as I had with the 14's. I was just tired of the lift and 5 point turns LoL.

Pics or its all just lies.

 

[Fenner408]

I just picked up my 20x12s w/-44 offset. Im planning on Fuel 35x12.5-13.5. Hopefully they clear well with minor trimming

 

[powerstrokin15]

I just picked up my 20x12s w/-44 offset. Im planning on Fuel 35x12.5-13.5. Hopefully they clear well with minor trimming

they'll clear with minor trimming.


Sent looking at my blown up 6.4

 

[Daryl@TDP]

20x14s, 33s, leveling kit...done.

 

[TyCorr]

14 wides.arent that wide on an older sd. On a 05+ 12 is.a.handful.

 

[MINK]

I hope I like mine but I see stock height and 22x12s in my future.

 

[Jeff@Spartan]

I hope I like mine but I see stock height and 22x12s in my future.

You could just go ahead and do that. oke:

Wait....I'll be quiet on that. LOL

 

[bigrpowr]

or this Josh...

to the OP: http://powerstrokearmy.com/forums/showthread.php?t=26612

might find some useful info in there even though it is titled on stock height

i meant minky.

 

[Daryl@TDP]

14 wides.arent that wide on an older sd. On a 05+ 12 is.a.handful.

It will work. Haha.