Reply to thread

Message: [QUOTE="robrike1, post: 1565033, member: 33184"] Hey everyone. 2004 F250 4 wheel drive 6.0 truck. I just recently changed both front wheel hubs/bearings unit with Timiken units and at the same time replaced my Warn hubs with original auto hubs. I reactived plugged off vacuum line and they seem to work but passenger side shaft is very hard to turn when free. When I removed passenger hub assembly there was only one washer and the fiber or nylon hex shaped thing on that side. On reassembly I put the metal then hex then metal washer in. Snap ring was super hard to get on but prying u-joint towards wheel a tiny bit got it on there. Is this why this side is so hard to turn by hand when free and not locked? Tried to take snap ring off but it was hard to get snap ring pliers to open it enough and it was getting dark so I gave up till morning. Was going to test operation spinning shagt using original setup which was there since I bought truck at 105k miles. Any harm running it this way? I assume everything is fine and it will wear in as I only have about 150 miles on new hub assembly. The driver side did not have the original round slotted thing that goes between knuckle and hub/bearing assembly. Was not aware till after I replaced it it took one. Works fine but I have one now to throw in there. Perhaps that is why driver side is significantly easier to turn shaft by hand when free. I feel like someone before my ownership messed this all up. Thanks in advance, Robert Sent from my SM-N986U using Tapatalk [/QUOTE]

Verification

Random media

Buster the wayward Boxer :)

vgt turbo functions

HPIM07031

IMG_20140510_185714_613

IMAG0532

the 89 and the 08

224160_144439965624381_100001751344127_260197_5467600_n

IMG_0636_1_

eleanor_at_dereks_3_

IMAG0046

Latest posts

Coined wheels
- Latest: PSD-BLACK-CLOUD
- Yesterday at 10:29 PM
Suspension, Drive Train, and Tires
10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 10:21 PM
2017+ 6.7 Aluminum Super Duty
2000 f350 dually lariat
- Latest: PSD-BLACK-CLOUD
- Yesterday at 10:18 PM
7.3 Aftermarket
6.4 dies while driving. Starts up again and dies. P0625
- Latest: taterthedog
- Yesterday at 10:28 AM
6.4 Tech
‘10 6.4 rebuild
- Latest: Powerstroke Cowboy
- Wednesday at 8:47 PM
6.4 Tech & FAQ

Members online

No members online now.

Total: 1,047 (members: 0, guests: 1,047)

Top