Does anybody have hornblasters on their truck?

[Pstroke96]

I just picked up a set of them and I have no idea where I could mount them I was going to put them on the passenger side under the bed but I don't have enough room. I want thwm to he as hidden as possie. pics would be nice
Thanks guys

 

[webb06]

Buddy with an 06 dodge has them in front of the wheel well on the passenger side of the bed. Real tight spot but they are really concealed.

 

[Pstroke96]

I was going to put them on a piece of diamond plate bolted to the bed cross members but it is just too small of an area

 

[webb06]

There isn't enough room like right behind the transfer case above the driveshaft and exhaust?

 

[Pstroke96]

I was going to put them on the outside of the frame rail but twy might go good there I might also just put two on each side if the truck

 

[89 Stroker]

im getting a set soon and plan on mounting them either inside the front bumper/on the the inside of the grill tucked away

or under the bed if that doesn't work, but you should be able to frame rail mount them

 

[Pstroke96]

I doubt they will fit in the grille they are a lot bigger than I thought. But I like the bumper idea

 

[89 Stroker]

heres a pic of the setup i want to try if they can fit on that 150 there should be double the room inside the grill on a f350/250

 

[bpb424]

I have an 08 f250
Horns are mounted on the passenger size frame rail. Compressor and tank are in my tool box

 

['94IDITurbo7.3]

does your spare tire fit/normally run in the spare tire spot under the box? if not then mount the horns right there. out of the way and easy to access for what ever reason.

 

[weekendwarriorfsw32]

I have horn blasters and there mounted up on the passenger side frame rail.

 

[Chris.v]

I have my horns mounted where my spare tire was and the compressor and tank up in the right rear corner mounted to the hitch frame.

 

[Pstroke96]

I ended up moubting the tank and compressor with u bolts right to the back of the hitch tube on the passenger sode

 

[Stroke_this]

I mounted mine under my toolbox

 

[Pstroke96]

I mounted two on Each side and ran all the lines up the drivers side. The solenoid i tapped into the factory horn. And they are ***king loud LOL

 

[ytee]

I mounted my horns to a frame I made then bolted it to the frame rail on the passenger side of truck right in front of the rear tire.