Electrical Issues need help

randylamarr

New member
Joined
May 18, 2011
Messages
83
Reaction score
0
Well guys I have been chasing an electrical issue for a couple weeks now. Truck runs and drives fine but I have no AC as well as check brake system and tire pressure faults on the dash. But yesterday my blinker indicators on the dash started not act up when I first turn on the key the indicators work but then they just stop working. The brake and low tire pressure lights are on the dash as well. The fluid level and tire pressures good. It is not giving me any codes. If I manually jump the relay for the AC the clutch sucks in and I have cold AC thought it was a break in the wire so I ran a jumper wire and no luck need help!!


Sent from my iPhone using Tapatalk
 

jus10keith

New member
Joined
Mar 10, 2013
Messages
61
Reaction score
0
Location
BIG COVE, ALABAMA
Are you running aftermarket wheels with no TPMS sensors in them or different factory wheels? If so, there's your TPMS light culprit. If you have sensors, you'll need to train them to your truck. There's a section in the owners manual showing how to do it.

I'm no help with the others.
 

randylamarr

New member
Joined
May 18, 2011
Messages
83
Reaction score
0
It will not communicate with with the tpms system I'm thinking a ground or BCM issue


Sent from my iPhone using Tapatalk
 

Latest posts

Members online

No members online now.
Top