raleighstroke
New member
- Joined
- Aug 8, 2016
- Messages
- 35
- Reaction score
- 0
New to forum folks so bear with me. :fustrate: I have a 2008 6.4 king ranch 200k miles. I was about to service it this weekend and right before I did pulling out of the driveway with a cold engine I got a low oil pressure can light and I heard a something that sounded like a faint siren up and down as I let out or got into the throttle. I backed up to flat ground and shut it down. I cranked it back up got the same light and let it warm up. After warming up exhaust started smoking a white/blue hard to decide which one. I decided to pull back in the driveway and park it. After this I noticed a large oil puddle where I had been sitting to let it warm up, maybe 1/2 a quart. Loaded it up with oil dye that night and waited. Could not really see much dye with the black light. But the oil did not start pouring out again until it go up to operating temp. This time I got the same oil can light, reduced power message and a P2463 message. The oil stream is coming down the passenger side off where the transmission meets the engine. Up top it looks like it is starting on the back side of the left turbo below the exhaust connection. There is a lot of oil on top of the heat shield for the HPFP. Any help with this would be appreciated. I cant pin point exactly where the oil leak is coming from. Plan to pull it apart but would like to get some parts on the way before I do. Any idea? Blown Turbo? Return Line Seals? (PS coolant holding steady, no ******s of any kind.) Thanks for any help