Reply to thread

Message: [QUOTE="SAK, post: 470632, member: 984"] I got mine working this weekend too, I ended up using a normally closed momentary switch hooked up to acc on power so that the truck would high idle when started with the remote start. The upfitter switches do not power up until there is key on. So I have it wired the following way: White/Brown and Green wire hooked together with a 33k resistor. (Idles at 1040 RPM) Acc power hooked to a normally closed momentary switch. The momentary switch hooked up to Yellow/Green. This allows me to put the parking break on and remote start the truck and have it high idle. The momentary switch allows me to "reset" the hi idle, since if there is any disruption (ie. take parking break off) while in hi idle you need to reset the system. [/QUOTE]

Verification

Random media

ce91c5c5

Hydroboost and power steering

IMG_0440b

20140706_190146

Window_switch_front

eleanor_part_two_9_

photo_28

coil removal

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 11:41 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Yesterday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Yesterday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US
Ford 7.3 Passenger Bank Dead
- Latest: Powerstroke Cowboy
- Monday at 8:20 PM
7.3 Tech

Members online

No members online now.

Total: 1,391 (members: 0, guests: 1,391)

Top