bluedge8
Active member
So I need to get my e-fuel going by Wed night. I am leaving for a atv trip and was planning on pulling tandem but the truck fell on it's face on the way home with the 5th wheel. I checked fuel pressure and it drops to 36 psi when I power brake the motor.
I have the following parts:
SD electric fuel pump with wiring harness
reg return kit I bought from PSD Eng
with 2 filter bases
fuel lab fuel pressure regulator and hoses
misc hoses.
1st question is how to get hose adapted onto the SD pump
2nd question is what style hoses go on the filter bases, pictures coming in next post.
3rd question is can I run all of this ahead of the fuel selector valve and keep both tanks.
thanks for any help
I have the following parts:
SD electric fuel pump with wiring harness
reg return kit I bought from PSD Eng
with 2 filter bases
fuel lab fuel pressure regulator and hoses
misc hoses.
1st question is how to get hose adapted onto the SD pump
2nd question is what style hoses go on the filter bases, pictures coming in next post.
3rd question is can I run all of this ahead of the fuel selector valve and keep both tanks.
thanks for any help