Injector pins 6.4

[Cknox121]

7 out of 8 played fair. The other said f you. I need 2 injector pins/trashed injector with good pins/etc. let me know what you got.


Thanks

Cody


Sent from my cracked iPhone using Tapatalk

 

[ghohouston]

What the hell is an injector pin?

 

[78f100]

I think he is refering to the pins that break when the tip sticks to the nozzle during a nozzle swap.

 

[Cknox121]

I think he is refering to the pins that break when the tip sticks to the nozzle during a nozzle swap.

Correct


Sent from my cracked iPhone using Tapatalk

 

[dsberman94]

Yea, they're no fun when they break. GL

 

[Cknox121]

Yea, they're no fun when they break. GL

No kidding. Only one what was super hard to break loose....shat happens.


Sent from my cracked iPhone using Tapatalk

 

[dsberman94]

No kidding. Only one what was super hard to break loose....shat happens.


Sent from my cracked iPhone using Tapatalk

For sure. Hope the rest of the project goes well for you.

 

[ghohouston]

I think he is refering to the pins that break when the tip sticks to the nozzle during a nozzle swap.

Gotcha

 

[sootie]

hit up 08BIGRIG on here...he may have some

 

[78f100]

I broke 2 my first time...lol then I asked for help. I have several injectors at the shop but they are good. Find a cool dealership or a shop that has some cores and see if they will trade you for the broke ones. Ford has a no fault core policy, as long as its complete, it can be broke basically.

 

[dsberman94]

I did nozzles on a set once. I didn't break any of the 7 I did the nozzles on. Then the owner of the truck wanted to try after he watched me to the 7. Got it off fine then broke the pins putting it back together. :doh:

 

[Cknox121]

I take it you need to hit with a hammer putting them back in?


Sent from my cracked iPhone using Tapatalk

 

[Dzchey21]

no you just have to be sure that the nozzle is pushed all the way against the body while snugging the nozzle cup down. It also helps to put a little light lube on the nozzle as well so its not trying to turn the nozzle with the cup

 

[Cknox121]

no you just have to be sure that the nozzle is pushed all the way against the body while snugging the nozzle cup down. It also helps to put a little light lube on the nozzle as well so its not trying to turn the nozzle with the cup

Thanks!


Sent from my cracked iPhone using Tapatalk