Lowered truck shocks

Platinum15

New member
Joined
Jul 7, 2015
Messages
25
Reaction score
0
Location
Sulphur springs
Ok, just got my set of 4800# springs and new set of rear ubolts for my truck. What shocks are being used once the trucks are lowered?
 

sootie

Well-known member
Joined
Oct 3, 2012
Messages
11,843
Reaction score
35
my factory ones worked that same as when it was factory height.
 

Platinum15

New member
Joined
Jul 7, 2015
Messages
25
Reaction score
0
Location
Sulphur springs
Never had any bottoming out issues? I'm looking to go aftermarket but everything I see says 0-1.5 lift. Didn't know if I went with a shock that can cover 1.5 over stock would bottom out when dropped 2-3"
 

Lipka101

New member
Joined
Feb 2, 2014
Messages
586
Reaction score
0
Location
Maryland
I have bilstein for factory height. No problems here.

Sent from my SAMSUNG-SM-G890A using Tapatalk
 

Jomax

Active member
Joined
May 18, 2011
Messages
8,576
Reaction score
7
Location
Arizona
I am dropping using 4400# springs and was told the stock height king shocks would work.

That is what I am ordering.


Mike, can get you some sweet kings, PM him. He has some on his truck.


Sent from my iPhone using Tapatalk
 

Black AOD

Well-known member
Joined
Aug 6, 2014
Messages
3,466
Reaction score
75
Location
Ohio
I am dropping using 4400# springs and was told the stock height king shocks would work.

That is what I am ordering.

Mike, can get you some sweet kings, PM him. He has some on his truck.


Sent from my iPhone using Tapatalk

I was about to post the same thing, I think Mike D. and a few others use kings on their lowered setups. He should be able to hook you up good!
 

Jomax

Active member
Joined
May 18, 2011
Messages
8,576
Reaction score
7
Location
Arizona
Will have to reach out to him.



Thanks!!


Spring for the adjustable 2.5s, that's what I'll be going with to make the ride perfect.

He said he almost took out the hop on concrete freeways expansion joints completely!!!


Sent from my iPhone using Tapatalk
 

Vader's Fury

Active member
Joined
May 18, 2011
Messages
3,302
Reaction score
1
Location
Chesapeake City, MD
I don't know if my budget can cover that.

I was looking at the standard 2.0 shocks for my Excursion. With the swap to coil springs and going from cheap ass Napa shocks to Fox shocks I hope the ride will be much better .
 

c12driver

New member
Joined
Sep 14, 2016
Messages
5
Reaction score
0
Hey gents, I am in the same delima....08 ECSB 2WD, slightly lowered and desperately needing shocks. Can someone point me towards Mike D.? or any other suspension expert?


Sent from my iPhone using Tapatalk
 

UNBROKEN

Active member
Joined
May 18, 2011
Messages
2,788
Reaction score
1
Hey gents, I am in the same delima....08 ECSB 2WD, slightly lowered and desperately needing shocks. Can someone point me towards Mike D.? or any other suspension expert?


Sent from my iPhone using Tapatalk

No Limit Fab in the vendor area or shoot Mike (Bigrpowr)a message.
 

Latest posts

Members online

Top