Midwest Diesel 2.5 truck

[sootie]

hard to tell from the videos but is it spinning out at the end? or just getting under the charger.

 

[TyCorr]

hard to tell from the videos but is it spinning out at the end? or just getting under the charger.

I think the second one

 

[Morgan@Midwest Diesel & Auto]

hard to tell from the videos but is it spinning out at the end? or just getting under the charger.

I think the second one

Little of both. Some it spins all the way and doesn't die. Some I can't get it out of gear before it does. It's hooking all the way to the end.


Sent from my iPhone using Tapatalk

 

[Morgan@Midwest Diesel & Auto]

Took a first tonight in good fashion. Changed to a smaller housing and it seemed to respond well.

https://youtu.be/05fCe5FnlW4


Sent from my iPhone using Tapatalk

 

[Rubenk]

Looking good man! Congrats!

Are you holding back any fuel in the tune? Seems exceptionally clean for 150%'s...

 

[ncollins64]

Awesome pull.

 

[Morgan@Midwest Diesel & Auto]

Looking good man! Congrats!

Are you holding back any fuel in the tune? Seems exceptionally clean for 150%'s...

We can make more fuel. Just trying not to over fuel it.

Awesome pull.

Thanks!



Sent from my iPhone using Tapatalk

 

[TyCorr]

Took a first tonight in good fashion. Changed to a smaller housing and it seemed to respond well.

https://youtu.be/05fCe5FnlW4


Sent from my iPhone using Tapatalk

Holy ***kin shti! That thing got an attitude about that housing swap. Good god. That thing runs harder than old #34, Sweetness.

 

[Rubenk]

We can make more fuel. Just trying not to over fuel it.




Thanks!



Sent from my iPhone using Tapatalk

Definitely makes sense! Just figured i'd ask.

 

[Morgan@Midwest Diesel & Auto]

Another first place from a week back. Same class, same pullers, same association. Put 10' on second place. Finally a track that would hold all the power the truck has.

https://youtu.be/yKjBA1x5N0s


Sent from my iPhone using Tapatalk

 

[Morgan@Midwest Diesel & Auto]

Planning on going the Schieds next week to run 3.0 smoothbore class. James is making me a 3.0 to fit in the s400 chassis like I already run. I am getting a set of duals lined up, here is the inner set.

Sent from my iPhone using Tapatalk

 

[300000 and counting]

Well, we have been to the dyno twice with nearly 12 hours on the rollers... Lol. Nothing but issue after issue. New k16's, lots of tiny adjustment problems and we are finally figuring out this truck. Still has yet to make a good dyno pass much over 700 lol.

Able to get it lined out last night and take home a win.

https://youtu.be/7lMEZIYTEQ0





Sent from my iPhone using Tapatalk

What HP are you running since you got the truck figured out?

 

[Morgan@Midwest Diesel & Auto]

Sent from my iPhone using Tapatalk

 

[diezelfreak]

Truck looks and sounds great. You definitely are getting the bugs worked out.


Sent from my iPhone using Tapatalk

 

[psduser1]

Another first place from a week back. Same class, same pullers, same association. Put 10' on second place. Finally a track that would hold all the power the truck has.

https://youtu.be/yKjBA1x5N0s


Sent from my iPhone using Tapatalk

Picture perfect!

 

[Morgan@Midwest Diesel & Auto]

https://youtu.be/rX9ug4vOjRk
https://youtu.be/rX9ug4vOjRk

Seem to be running into this thing having more power than we can put to the ground. Given the single rear wheel and 35/12.5 tire limitation it's been Proving to be a challenge to hook well on tracks that are loose.


Sent from my iPhone using Tapatalk

 

[Morgan@Midwest Diesel & Auto]

Getting ready for Scheids

Making some changes to get the duals on, 3.0 turbo in, a little maintenance, fresh oil, new drive shafts after breaking, oh and a shiny set of fans to help out parasitic drag.


Sent from my iPhone using Tapatalk

 

[bigrpowr]

i woulda made you a tube with no filter minder hole ! needs a no limit sticker. good luck buddy !

 

[Morgan@Midwest Diesel & Auto]

i woulda made you a tube with no filter minder hole ! needs a no limit sticker. good luck buddy !

Haha, yeah the hole was an afterthought when ordering.

I will look, I should have a no-limit sticker. I got some decals to put on before I leave. Add that to the list.


Sent from my iPhone using Tapatalk

 

[AirFishAutomotive]

Haha, yeah the hole was an afterthought when ordering.

I will look, I should have a no-limit sticker. I got some decals to put on before I leave. Add that to the list.


Sent from my iPhone using Tapatalk

is that a drop in fan kit or did you fab it up ? What cfm?