Pcm

Bluehd · Jun 28, 2015

I just swap a 2002 engine on my e99
And its not working right
Do i need to swap the pcm or its the same one?

co04cobra · Jun 28, 2015

e99 and 02 will not interchange. Need to use the pcm for the year of the truck.

Arisley · Jun 28, 2015

And the 2002 wiring harness.

uncool · Jun 28, 2015

What is not working right?

94 through 03 engines are the same contrary to what some people think.

The differences are the sensors/configurations from the years. California vs. non California.

Hopefully you still have the e99 engine as it came out of the truck. You need to transplant the e99 stuff to the 02 motor first off. DO NOT start changing the PCM.
THAT IS THE LAST THING YOU WANT TO DO!!!

It sounds like a simple wiring miss match, not a big deal.

I have done swaps 10 years and have never had a problem. Have put MANY T444e motors into blown up trucks, hardest part of that is the oil pan change.

Bluehd · Jun 28, 2015

Like at idle the truck runs fine but when i get it to the road
You need to floor it all the gas pedal and it bearly move

uncool said:
What is not working right?

94 through 03 engines are the same contrary to what some people think.

The differences are the sensors/configurations from the years. California vs. non California.

Hopefully you still have the e99 engine as it came out of the truck. You need to transplant the e99 stuff to the 02 motor first off. DO NOT start changing the PCM.
THAT IS THE LAST THING YOU WANT TO DO!!!

It sounds like a simple wiring miss match, not a big deal.

I have done swaps 10 years and have never had a problem. Have put MANY T444e motors into blown up trucks, hardest part of that is the oil pan change.

Bluehd · Jun 28, 2015

?.....

co04cobra · Jun 28, 2015

Let me rephrase. You need to reuse the engine harness from your current truck and leave the pcm.

If it was just a engine change you probably never messed with the PCM.

I was trying to say, in my first post, that a 02 engine harness will not work with a 99 truck or vice versa.