SPE makes 1230.4 HP on FUEL ONLY!'

SPE

New member
Joined
Nov 28, 2011
Messages
622
Reaction score
0
Location
Carmichaels, PA (SW, PA)
We worked on the tuning for the race truck today after being asked by so many people why the torque number was off. We also wanted to see if we could get the truck to light earlier and make the torque number it should. Due to the short rev range of the 6.7 and the large turbo setup we couldn't get the eddy brake to snap on early enough by itself to load the truck properly so we applied the Dyno load along with the foot brake in an attempt to get the torque on. Here's what we got. This is fuel only with SAE corrected, smoothing 4, and a lot more load. Highest number was 1230.4 HP & 1982.3 TQ on FUEL ONLY!!!! This run was 1197.4HP & 1916.6 TQ. Both ran with nitrous off. The videoed run was slightly lower since the truck was doing back to back passes & getting warm.

https://m.facebook.com/story.php?st...4&ref=m_notif&notif_t=like&actorid=1404444300
 
Last edited:

01PSD

New member
Joined
Sep 30, 2011
Messages
4,255
Reaction score
0
Location
Smithfield, NC
wrong video LOL
Edit: the video is only 15 seconds.. but on FB the full length video works
 
Last edited:

01PSD

New member
Joined
Sep 30, 2011
Messages
4,255
Reaction score
0
Location
Smithfield, NC
Is it still not fueling all the way out past 3800 or are the turbos really destroying those 60% over injectors? LOL
 

Latest posts

Members online

No members online now.
Top