Reply to thread

Message: [QUOTE="wjamesm, post: 1554980, member: 794"] I am in the process of replacing the motor in my 95 F-Superduty . I pulled the motor because I was getting water in the oil . After checking everthing that I could while the engine was in the truck i decided to pull the engine . After I got the engine out I pulled the pan and saw this [ATTACH]52420._xfImport[/ATTACH] . The motor was a jasper rebuild so I called them with the serial number but they said it must be more than 10 years old , they don't keep records older than that . I bought a used motor out of a 97 that the seller said had 150k on it . I don't know how many miles are on the bad jasper motor but everything is alot cleaner on it than the replacement motor . So I am wanting to switch the turbo , fuel filter housing , HPOP , up-pipes and oil pan over to the good motor . I have all new gaskets and o-rings for the turbo and pedestal , up-pipes , exhaust manifolds and HPOP . My question is can I used the 95 HPOP on the 97 motor ( I read that I can) and the oil pan if I use the 95 pick-up tube ? [/QUOTE]

Verification

Random media

2011-11-23_13-33-09_402

front_axle_swap5

6.4 powestroke fluidampr

clutch2

20121111_1801061

superduty_poster_pic_4

2013-01-06_17-11-25_142

SF2

2013-01-06_17-11-35_447

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Today at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 830 (members: 0, guests: 830)

Top