Reply to thread

Message: [QUOTE="alwaysdiesel, post: 1407078, member: 14250"] I'm in the process of finishing a HPFP replacement along with the gasket (shorted wires :fustrate:) I installed the turbos today with all new Orings and seals. I installed the low pressure turbo drain with the nipple side facing the turbo. I looked at a picture I took when I removed them and it was the other way around. Is it going to leak like this? I'm going to use callipers and measure the old one tomorrow to see if both ends are the same size. If they are, it technically should seal? Would like to know if I need to pull them off again before I drop the cab back down. Thanks in advance, need an answer asap! [/QUOTE]

Verification

Random media

20150221_133558

Diesel

silver_trucks

Snow_White_is_Back-1

2009 F250

Electric fuel

My 2000 F250 7.3L

Next project

he351ve

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 633 (members: 1, guests: 632)

Top