What is the best way to get 50hp

mind if I smoke

New member
Joined
Mar 3, 2013
Messages
423
Reaction score
0
Location
Knoxville, TN
i got about 90hp from the chip and as for as the trany goes ive got a 6 speed manual. so a sct with a custom tune will do more then the chip.
 

6.0 p-stroke

Moderator
Joined
May 18, 2011
Messages
2,154
Reaction score
0
Location
North of San Antonio, Tx
Start by ditching the chip in favor of an SCT with custom tunes. Then add some fuel, I believe a 175cc injector would be a good start, I'm not sure if a 155 is capable of 500+, I could be wrong though it's been awhile since I've ran that size of injector. Then a powermax for some more air, plenty of people run similar setups and make a reliable 500 hp all day long.
 

HeavyAssault

Active member
Joined
May 22, 2011
Messages
1,343
Reaction score
0
Location
Middle, VA
Pmax turbo and a GOGO Stage 1 manifold to your current setup. Add custom SCT tuning and watch the tires roll.
 

Mdub707

Active member
Joined
May 18, 2011
Messages
5,079
Reaction score
0
Location
Mohawk NY
First, what the hell is a van akken chip, and how are you even at that power level with it? That thing has got to be hurting your trans.

First step is lose that and get an SCT with custom tuning, you really can't (shouldn't) do injectors or turbo before that. You have no way of controlling anything with whatever it is you're using.
 

sootie

Well-known member
Joined
Oct 3, 2012
Messages
11,849
Reaction score
35
good advice given, scrap the tune you have-get an SCT with Gearhead tuning. then add a powermax turbo and some bigger injectors. Done.
 

Mdub707

Active member
Joined
May 18, 2011
Messages
5,079
Reaction score
0
Location
Mohawk NY
Still might not be 500rwhp, but should be pretty close. A pmax and 155's should be around 450-465ish right?

I find it very hard to believe it's making an honest 458 rwhp right now, though the FICM tune may be making up for a lot where the other chip is leaving off. Heck, I dyno'd 466rwhp with nothing but eric's x-race tune. That was through stock intake, stock exhaust with cat and muffler in place. I obviously don't believe it though.
 

HeavyAssault

Active member
Joined
May 22, 2011
Messages
1,343
Reaction score
0
Location
Middle, VA
Drop in this............

Billet+6.0+Powerstroke+RZS+3+.JPG
 

Mdub707

Active member
Joined
May 18, 2011
Messages
5,079
Reaction score
0
Location
Mohawk NY
Looks like the new dieselsite wicked wheel 2 if I had to guess. You can also try talking to the guys running the MTW turbo's on here, pretty inexpensive upgrade.
 

mind if I smoke

New member
Joined
Mar 3, 2013
Messages
423
Reaction score
0
Location
Knoxville, TN
Has anyone used the injector kit harrisford was talking about that takes my factory injectors to a 155 or 175. I was thinking i could do that with the wicked wheel(if it will fit) and a sct tune.
 

imelmo

Active member
Joined
May 18, 2011
Messages
6,632
Reaction score
2
I have heard alot of horror stories about nitrous


What horror stories have you heard? I've been around it a fair amount of time and the only issues I've ever heard come from the add'l power, not the nitrous.

.
 

Latest posts

Members online

Top