Wheel fitment questions

bbessette213 · Apr 28, 2015

I found some procomp 18x9 4.75 bs and -6mm offset. My question is how flush would these sit with my fenders? I don't want them sticking out some in godly amount..

josh@thedieselcartel · May 1, 2015

What size tire you wanting to put on them? If you put a 12.5" wide tire on them, I would say they will stick out .5-1"

JCROMAN73 · May 5, 2015

I have 17x9 -12 with 35x12.5 on mine. They stick out about 2 inches. So with a -6 and 12.5 tire you are looking at about 1.75 sticking out. even zero offset will stick out on these trucks with a wide tire. you need to go negative if you want to keep it inside.

mandkole · May 5, 2015

depends on the truck also... the late models will stick out as said above, but an early SD has a hub face that's inset about 1.6" so it should be more flush to the body. However, the inside would need to be checked for spring rubbing.

DSL_PWR · May 5, 2015

bbessette213 said:
I found some procomp 18x9 4.75 bs and -6mm offset. My question is how flush would these sit with my fenders? I don't want them sticking out some in godly amount..

http://www.rimsntires.com/specspro.jsp

Go here. Enter your stock size wheels and then the wheels you want. This will tell you how far they will stick out and size specs.