hey guys i got a 2008 f350 with 20x9 bmf wheels with no off set and 35x12.50 and they do not rub at all with out a leveling kit so if i put in a 2.5'' leveling kit with 22x10.5 bmf wheels with 35x12.50 tires do you think they will rub the bumper or painted fender?? if they rub inside the fender well i can pull it back or cut it but the rims backspace is 4.50 in i think has anyone done this?
will 22x10.5 rims with 35x12.50 fit with just a 2.5 leveling kit on a 2008 f350
- Thread starter jmd2422
- Start date
- Joined
- May 22, 2011
- Messages
- 15,240
- Reaction score
- 1
Highly doubt it unless the offset is jacked up.
powerstrokin15
New member
doubt it. need like a -44mm offset
Corb@CorbinShipping
New member
Like mike said, if the offset is huge, then the tires will hit something. I run 20 x 10 BMFs, with 325/60/20 nitto terra graps (35.5 x 13), and a 2 inch BDS level kit. BS is 4.75, and I had to cut the fender skirts a pretty descent amount. They didnt touch the painted fenders, nor the bumper, but they rubbed the skirts, bad. your rims sound the same as mine, but 1/2 inch wider, so, you might have to do what I did. But you shouldnt hit fender at all.
PTSUPERD
New member
- Joined
- May 16, 2011
- Messages
- 9,115
- Reaction score
- 0
Offset on a BMF 22 x 10.5 is crazy. I'd go bigger than 2.5" lift and 35s.
I know my truck has different fender openings but it indriveable with the same combo:
I know my truck has different fender openings but it indriveable with the same combo:
PTSUPERD
New member
- Joined
- May 16, 2011
- Messages
- 9,115
- Reaction score
- 0
Do 4.5. You will clear with no issues on a 08
powerstrokin15
New member
mostar is running a 22x11 monster 35x12.50s on his leveling kit. -44mm offset
and im running a 20x10 throttle 35x12.50s on stock height. -24mm offset.
i think itll work with some trimming and work awesome. if not you can always go to a 33" if they will handle it on a 22"
and im running a 20x10 throttle 35x12.50s on stock height. -24mm offset.
i think itll work with some trimming and work awesome. if not you can always go to a 33" if they will handle it on a 22"
Jeff@Spartan
New member
Aaron Rudolf had 22x10.5 Novakane's on his crew cab, slammed on the ground, with Nitto 420S's. I know it's not 35's, but the truck was lowered.
the 35x12.50 are sitting in my garage soi cant go to 33s nowhte rims are back ordered and i already have 35s i cant down size and 33s on a 22 in wheel leaves like no tread the offset is -22 and 4.5 or 4.75 back space if your running -24 eric then my should def fit
powerstrokin15
New member
well thats what im saying. im running the same setup essentially-on stock height although yours are .5" wider
people at fuel told me i need 4" to do my setup.. i texted him a picture when i got em mounted and he was suprised
