1badpsd
New member
As the title says looking for new or low mileage used pump for friends 99
And your going to let a friend run a srp1? Some friend you are!
If he's running 200s check out the honeybadger Jr.
Last time I texted Jason, still no word on Sr. the nice part is, you know the thing is gonna be right when they release it.
It won't hold ICP either.
Have you ran one and data logged with injectors having 200% nozzles?
Have you ran one and data logged with injectors having 200% nozzles?
Not me directly, No.
But a guy that wanted to buy my dual pump setup was running one with his 250/200's... I wonder why that would be?
Ill say it again, when mine worked it was nothing short of breathtaking. You.could.be loafing along, pin the throttle and watch icp ramp up to 3600 psi instantly. No waiting involved. But a handful of those scenarios, a couple thousand miles, and then tons of issues all related to idle, egts, and driveability started to manifest. Until it started stalling out and not building over 2900 psi of icp, I never thought it could be the pump. It was a monster in terms of volume. Unreal!
I mean the pump had 0 miles. Drove it in the summer and that is when it worked well. Then in Oct of last year it got tough to start but the heads werent draining the reservoir. I thought just maybe my gp system was really shot, who knows?
Then it became hard to start all the time. Then it died and I had to tow it. Then it died again. Then again. Then it got to the point that it wouldnt run once the oil was warm at all. Mind you, two different sets of injectors. Both checked out to be good.
It was troubleshot by two or three other to see if my conclusion was right. Same deal. Then the last guy even deadheaded the pump, hot, and cranking the one port would build right under 300psi of icp, the other 0.
Ill say it again, when mine worked it was nothing short of breathtaking. You.could.be loafing along, pin the throttle and watch icp ramp up to 3600 psi instantly. No waiting involved.