Search results

  1. Nic

    Need a stage 1 5R

    Any suggestions? Shes tired. Was looking At Twisted and a few others. No mods other than the usual. IDP street daily. She don’t get driven hard anymore and occasional pulling. Max 8k
  2. Nic

    Lift pump/high pressures issues

    Thanks! I ended up ordering the FASS 140. I’ll shim the spring if I need to. Thanks for the heads up. Sent from my iPhone using Tapatalk
  3. Nic

    Lift pump/high pressures issues

    Good morning all, currently been having several issues from my current setup which is an old legacy series FASS lift pump going into an aeromotive high pressure pump up to the regulated return. Wanting to ditch that system and go with one central unit capable of 55psi or so. Any suggestions? Thanks!
  4. Nic

    05-07 Long bed 4x4 Donor cab and frame?

    Anyone have any that are in semi decent shape?
  5. Nic

    Regulated return with FASS and aeromotive

    Currently have a sump, to an old school FASS red base pump, pushing to an aeromotive pump, then through a big CAT filter, and then to the regulated return setup. I need to replaced some old fuel lines this week and do y’all think I’ll be ok with doing away with that CAT filter after the...
  6. Nic

    Valve cover gaskets

    Thank you sir!
  7. Nic

    Valve cover gaskets

    When replacing the valve cover gasket, what else has to be replaced with it? Any injector O-rings or tubes too?
  8. Nic

    Anything new?

    Thanks guys
  9. Nic

    Anything new?

    Right on! I'll look into that. Thank ya sir.
  10. Nic

    Anything new?

    Ok I guess that solves that. Is there any way better than a typical coolant filter to keep them clear? Maybe backflushing every 6 months or so? The truck has always had a coolant filter but it seems like that prolongs the eventual issue rather than prevents it.
  11. Nic

    Anything new?

    About to dive into my 04.5 for injector re-seal, oil rail rebuild , ficm and a few other things. Also considering the high flow oil.cooler from Rudy's. Anyone use it yet? Is there anything else I should consider that anyone has found to be a long term issue while I'm in there or is it just the...
  12. Nic

    Anything new?

    About to dive into my 04.5 for injector re-seal, oil rail rebuild , ficm and a few other things. Also considering the high flow oil.cooler from Rudy's. Anyone use it yet? Is there anything else I should consider that anyone has found to be a long term issue while I'm in there or is it just the...
  13. Nic

    Green coolant?

    So in yalls experience, what's the thoughts on Rotella ELC as a replacement?
  14. Nic

    Green coolant?

    Does anyone know if this is correct from the factory? Did it change? About to take some things off this engine and just wondering if its correct. I couldn't find much online. Thanks
  15. Nic

    Oil flow valve?

    Hope I'm not beating a dead horse as I haven't been on here in a while. I recently had oil temp of 225ish while towing around 6k with my 2012 and the truck cut the power in half from the temp threshold from what I was told. I've heard that the problem is a faulty oil valve in the pan restricting...
  16. Nic

    Random loping at idle

    2012. Full deeletes, has random loping at idle. Clears, then comes back at random times. Any ideas? By my gauges, it idles at 55-5800 rail pressure but as it warms up to operating temp, it idles at 4100 ish.
  17. Nic

    No fuel pressure. Need help please.

    I guess everyone else is as stumped as me
  18. Nic

    No fuel pressure. Need help please.

    Ok, installed high pressure Fuelab pump 40401on existing base of the velocity 200gph system, 75micron pre-filter backed to it, outlet fuel ran to regulator, through regulator to inlet of topside HS filter base. Return from regulator ran down and T'D to the return on the filter base which goes...
  19. Nic

    E GEE R

    Will the 2015-2016 e-gee-r block work on 2017?
  20. Nic

    Lift pump install?

    Got a fuel lab setup halfass on. Wondering about the factory return. From what I'm looking at, does the factory pump push fuel to the filter and return back? I have the return from the fuelab hooked up but now wondering what you guys are doing for the upstream return?

Random media

image69
IMG_20130414_140925_233
1997 ZF5 DRW
IMG_0315
Resampled952011-11-059517-05-5395567
25634_1295950922276_1335447039_30951808_1247213_n
truck23
2013-01-06_16-43-53_166
jeep_trunk_sub
image10
Resampled952011-11-159516-27-2395188
IMG_3916

Latest posts

Members online

Total: 423 (members: 4, guests: 419)
Top