Search results

  1. elrodalexander73

    GearHead stage 1 cam??

    I was reading a post on here are guys up there in the ohio valley really making 800hp in the 2.5 class already, heck down here in the "clay" (Tennessee/Northern Alabama) belt where pulling tracks are sticky I think the hottest thing I've seen is Adcock farms duramax, which he is pulling in the...
  2. elrodalexander73

    GearHead stage 1 cam??

    Don't say that word "RODS" ugh 2500 bones, trust me I want to buy them but my better half has demands outside of this project. I rebuilt the engine 30,000 miles ago and had everything balanced, blue printed, I put in ARP head studs, had the block checked, bored blah blah, I know those are the...
  3. elrodalexander73

    GearHead stage 1 cam??

    I plan on doing some head porting, which charger will match the injectors I have, while I remove the engine to do the camshaft swap, I plan on installing a lower end girdle, main studs, been looking at the Crower Valve springs (are they worth it??) and of course pushrods... Definitely going to...
  4. elrodalexander73

    GearHead stage 1 cam??

    What dyno proven gains have been found with Gearheads stage 1 camshaft??
  5. elrodalexander73

    932hp single turbo, fuel only

    Didn't you guys sponsor "the lone stroke" I heard he was putting down some serious #s and the development he was able to help you guys with testing different parts was pretty substantial, I know he was giving those 12vs fits, I think the 7.3s have a lot of potential left, I think once we are...
  6. elrodalexander73

    97 F350 24 valve fummins

    Thats sounds like one mean Fummins, I just hope the streetable part works out for ya, the tuning will be a little more difficult imo, I may be wrong, I'm just glad you're using an OBS truck, they were such a good pickup, post more PICS!!
  7. elrodalexander73

    Tow pig idea WITH A CAT!!!!

    The C7 and 3126s were fine engines, they didn't leak oil IF you changed the air filters and kept the dirt out of them and the blowby down on them, seen many, and no not one or two, many with tip top maintenence last well over 800,000 in box trucks, most people tried to run the extended oil...
  8. elrodalexander73

    97 F350 24 valve fummins

    What size plungers and barrels are you looking to run, .120" lines are hard to fill with stock barrels, give the guys at Scheid, Haisley or Columbus DI in Ohio a call, 800hp with a 12valve is doable and very easily achieved, but "streetable" is another thing to be said, it is after all a...
  9. elrodalexander73

    OBS Regular cab PIC THREAD

    Just another OBS F350
  10. elrodalexander73

    1997 impossible to tune

    I went through a similar issue with tuning, when a tuner writes a program for a truck, he has no visible information to go off of, when you submitt your order for a tune, basically explaining to him what you have, which is everything from hpop setup, injector size (and nozzle size, very...
  11. elrodalexander73

    to rebuild or not?...

    The obs trucks were one of Fords better "inventions" and they are very easy and cheap to repair for the most part, if you even plan to build 800hp, I've laid down 574hp at Clarke Power in Antioch Tn on a taylor load dyno (where I work) and it took a few other things to get it to hold other than...
  12. elrodalexander73

    96 powerstroke. Blue smoke at idle.

    Blue smoke is a bad sign oil past the rings or bad valve guides/seals, if it sat for two years most likely the valve seals have dried up and when you load the engine with the mods you have added the extra pressure the seals tend to leak on a decel when oil builds up around the upper area in the...
Top