Search results

  1. strokin'_tatsch

    Project Wheels Up

    A 1.53 60' is blazing for a brand new setup.... Sent from my SAMSUNG-SGH-I337
  2. strokin'_tatsch

    Valair Clutches

    If you may upgrade injectors down the road, I would go with the kevlar/ceramic or an organic dual disc. The dual disc will be more friendly for your towing, but the kevlar/ceramic single disc will be more friendly to your pocket book. Pick your poison. The single will be more "aggressive"...
  3. strokin'_tatsch

    Strictly diesel hutch mod fuel line problems

    I just did my fuel system a week ago. I had the fuel line sitting out in the sun while I pulled the fuel tank and did the mods in the tank. When I went to install the line I dipped the end of the fuel line in diesel and put a little diesel on the hard line on top of the tank. It's tough to push...
  4. strokin'_tatsch

    Day of Diesel fun in Joshua, Tx.

    I may come check this out. Sent from my SAMSUNG-SGH-I337
  5. strokin'_tatsch

    Farmers Injectors......

    I've been trying to warn people against that douche nozzle since he first pulled that stunt with Jim and Nate.. I got called narrow minded because I told his supporters I would never run his injectors strictly b/c of what he did back then. I'm getting the last laugh now though. :D
  6. strokin'_tatsch

    Better hubs???

    Warn premiums all day.
  7. strokin'_tatsch

    Ennis tx April 12 2014

    I'm always jealous of everyone getting there on Friday. I'll be on the way about 5:30am tomorrow....
  8. strokin'_tatsch

    SD engine harness and PCM in an OBS

    Track down OBS stuff. I briefly looked at my SD and OBS this morning... looks like a huge PITA. Sent from my SAMSUNG-SGH-I337
  9. strokin'_tatsch

    SD engine harness and PCM in an OBS

    It is possible. I believe Cale did it back in the day. It is not easy though... Without having the two in front of me, I don't want to assume what would need to be done, but my best guess would be repinning the factory OBS PCM connector would be the easiest route since the engine bay harness has...
  10. strokin'_tatsch

    Project Wheels Up

    Dang that's light! Last time I weighed my 2wd OBS, it was 6500 lbs. lol That thing should get with the program if the suspension does what you're thinking it will do.
  11. strokin'_tatsch

    Fixing curb rash on wheels???

    Sure, if I decide not to get them I will let you know. I believe Njjeep was also interested in them as well. I have a feeling that I'm not really going to like the 20" look on my truck. I've always been a little more drawn to 17-18" wheels. My main reason for even considering these was if I...
  12. strokin'_tatsch

    Fixing curb rash on wheels???

    Thanks for the tip. I hadn't even thought about finding a shop that specializes in this. I found some places local to Austin that I'm gonna check out this week. Njjeep, if you're reading this, your PM box is full. I couldn't reply to your PM. Sent from my SAMSUNG-SGH-I337
  13. strokin'_tatsch

    Fixing curb rash on wheels???

    Some of the gouges are pretty deep. I have my doubts about being able to sand it all out and have them look right afterwards.. I think I should find a set in better shape. Sent from my SAMSUNG-SGH-I337
  14. strokin'_tatsch

    Fixing curb rash on wheels???

    Does anyone know whether or not one would be able to fix curb rash? I'm looking at a set of 20x10 Weld Cheyennes. I can get them uber cheap, but every single one of them have curb rash pretty bad. Any ideas?? Sent from my SAMSUNG-SGH-I337
  15. strokin'_tatsch

    HID's out..LED's in

    It actually doesn't on the older 9007 housings like my '03 housings. Those only light up the top half of the housing on low beam and the pattern was great on the road. Sent from my SAMSUNG-SGH-I337
  16. strokin'_tatsch

    HID's out..LED's in

    And this is to answer the same question in regards to 9007 LEDs... or at least the ones I got. You can see that the tabs on the inside of the ring are different widths. The grooves in the bulbs match this. I cannot turn this ring 180* without filing that tab down to match the width of the...
  17. strokin'_tatsch

    HID's out..LED's in

    Mine are 9007s. I'll check them again when I get home, but I'm 99% sure the tongue and groove on one side is wider than the other side of the ring. That makes it so that the ring only goes on one way. I tried flipping it when I originally did the install.
  18. strokin'_tatsch

    HID's out..LED's in

    I tried that. I had to take my rings off and modify my locks to hold the LED bulbs in the housing. On my bulbs, the rings can only be installed one way on the bulb. Basically, it is impossible to turn the bulb 180* in the housing without modification.
  19. strokin'_tatsch

    Project Wheels Up

    What's the return voltage from the TPS with the pedal in the idle position? Sent from my SAMSUNG-SGH-I337
  20. strokin'_tatsch

    HID's out..LED's in

    Mark is on vacation. He said he'd be back tomorrow, so bear with him. Sent from my SAMSUNG-SGH-I337

Random media

bryanstruck
P6190007
IMG_5564
0181
IMAG1040
JS
7.3 XLT CREW CAB 4X4
Trucksetup
20121013_131850
image389
20121013_131825
8

Latest posts

Members online

No members online now.
Total: 344 (members: 2, guests: 342)
Top