Search results

  1. White_monster

    Cab off repair and lift installed on my 6.4

    My non vgt compound kit is for sale if interested. Cones with everything to install.
  2. White_monster

    Cab off repair and lift installed on my 6.4

    Hit me up. I have some information on turbos you will like.
  3. White_monster

    Cab off repair and lift installed on my 6.4

    Nothing like a Precision 76mm into a 59mm vgt. Stock fuel it spools great and makes awesome power. Low egts too. Hit me up if your interested.
  4. White_monster

    *** ******

    H&S performance is gone but H&S Motorsports is still around which is why they have ads still.
  5. White_monster

    Who currently makes the best Performance Injectors?

    Elite diesel engineering has closed up shop.
  6. White_monster

    Who currently makes the best Performance Injectors?

    Exergy. Likely they won't do anymore 6.4 injectors. Call them though
  7. White_monster

    My Build Thread-American Hogger

    Stoked to see this come back to life. Gives me some ambition again.
  8. White_monster

    Progress report on my build

    Well all new gaskets for upper and lower of the engine have arrived. New rings. New billet RCD oil pump. New cam and lifter. New piston cooling jets. Liner is on route. Might sell my rods and try a custom set, any interest in my very lightly used set? Then it's time to decide if I should do a...
  9. White_monster

    Pcm/ tuner question

    As long as your stock file is on the SD card you can use his.
  10. White_monster

    DS low beam out

    Go back in the harness until the next connection and see if you have power.
  11. White_monster

    AKF250 Alaska Build - (650-700HP BUILD)

    I figured. I wouldn't use ppei tuning for anything. Custom tunes for the build is the only way to go. Also sotf is such a waste of time. Set tune and leave it. There's zero need to go to a lower tune since the lower tune isn't going to save the engine if a person still runs the big tunes. It's...
  12. White_monster

    AKF250 Alaska Build - (650-700HP BUILD)

    The tuning you use is very very different from the tuning the OP needs. Not even the same level at all.
  13. White_monster

    AKF250 Alaska Build - (650-700HP BUILD)

    Get a spearco and have the logo removed. 1200 is not high for temps though and I wouldn't expect to lose much temp with a new intercooler, I know I didn't lose anythj g worth mentioning with mine.
  14. White_monster

    Show & Go/Going to Try this Out combo Build

    Another DPC takes a crap. Not surprised.
  15. White_monster

    s476 single tuning

    It will always haze a little. Can try asking the tuner to shorten the pulse width at idle more. But you can only cut back so much and those are big injectors. I have roughly the same size and they haze all the time.
  16. White_monster

    6.4 T6 Single Turbo

    Why would you want to use a T6 flange for a single on the street in the first place? The large exhaust housing would hurt spool up and you wouldn't get it spinning to its max potential thus hurting peak power. Unless it is a competition truck and a class requirement I would advise against...
  17. White_monster

    Aftermarket radiator, stock hoses will not fit

    Sounds like your rad has a sizing error.
  18. White_monster

    Hot side intercooler pipe

    I build all my parts. It's rarely cheaper. I built the y pipe for my dad's truck and it cost me $350 in materials. I guess if you make the flanges out of plate and don't cut an oring groove it's cheap. But full machined flanges are not cheap as the cnc travels only so fast. I want to see your...
  19. White_monster

    Hot side intercooler pipe

    So have you priced out the materials to build this yet? The last one I built was $400usd in materials. Takes about 4hrs to cut, prep, and tig weld the pipe. So welding gas, tig rod, and power costs would be about $40. Paying an employee wages during all this would be another let's say $80usd for...
  20. White_monster

    Single Turbo size for a everyday work truck.

    Welcome to towing with a single. They are just not suited to it

Random media

Smokyred
08 mirrors
023
2016 250 6.7
image352
My 2000 F250 7.3L
2012-11-28_16-08-02_661_1_
IMG_3913
206008_4379348959642_429498309_n
08 excursion
eleanor_part_two_83_
My white 06 f350

Latest posts

Members online

No members online now.
Total: 384 (members: 0, guests: 384)
Top