Search results

  1. JohnT24

    Advice on this turbo wheel….

    Thanks Yes Everything spins fine/no play
  2. JohnT24

    Advice on this turbo wheel….

    No It doesn’t have noticeable play Could something have possibly got sucked in ? Looks like something got dragged slightly… But that dent mark is very strange… I know for a fact it’s never been apart and also I never drove the truck without an air cleaner Very strange.
  3. JohnT24

    Advice on this turbo wheel….

  4. JohnT24

    Advice on this turbo wheel….

    I know you guys hate high resolution pictures but here is a close-up of the backside of the wheel.
  5. JohnT24

    Advice on this turbo wheel….

    I’m getting around too taking my turbo apart for a rebuild kit and also a 1.0 housing This is what the backside of the stock wheel looks like…. Do you think this was caused by a bad bearing? Funny, the bolts don’t show any wear… As far as I can see.
  6. JohnT24

    Tuning the 7.3 in current times

    I would call jeli I would bet a dime to a dozen donuts That he could set up a TS board also.
  7. JohnT24

    Connecticut Diesel Dyno Day

    Cool
  8. JohnT24

    New guy from Oxford CT.

    Late is kinda my thing.
  9. JohnT24

    Fender Flares- Got pics?

    That looks pretty good
  10. JohnT24

    CAT Filter #'s anyone?

    Thanks
  11. JohnT24

    Oil pan silicone advice.... ?

    TA-31 And have always used Rotella T 15w-40 Knock on wood …
  12. JohnT24

    Oil pan silicone advice.... ?

    Me either But I guess it couldn’t hurt for the first oil fill. Anyway Pan is on Thanks for the tips guys. [emoji481]
  13. JohnT24

    Oil pan silicone advice.... ?

  14. JohnT24

    Oil pan silicone advice.... ?

    None on threads??? This advice seems to go against what Patrick posted.
  15. JohnT24

    Oil pan silicone advice.... ?

    It was interesting to see the amount of silicone from the factory. NOT An excessive amount Although there was some silicone squeezed out both inside and outside of the oil pan. Nothing that squeezed inside the oil pan ever left. So I assume Ford uses that method also….. letting the...
  16. JohnT24

    Oil pan silicone advice.... ?

    Thanks I’ve made a couple dowels also To help line it up
  17. JohnT24

    Oil pan silicone advice.... ?

    I’ve got it dry fitted right now Looks good but I might give one of the corners a tap because I see a slight gap there. Here’s a stupid question, Seems like it would be easier to apply the silicone to the pan Instead of applying silicone to the block. Do you think this would make any...
  18. JohnT24

    Oil pan silicone advice.... ?

    Yeah I’ve read a couple different opinions on that. Some also say to put the pan immediately Compress the silicone slightly Then give it a waiting period before completely torquing the bolts.
  19. JohnT24

    Oil pan silicone advice.... ?

    Awesome, thank you Patrick. I was wondering about the bolt holes because the stock bolts DID have some silicone on them. Antifoam ….. hmmm, I will have to get a bottle of that. I did find the ford spec, Its 1/8” bead on rails and 1/4” on ends/ corners.
  20. JohnT24

    Oil pan silicone advice.... ?

    I'm just about ready... Engine has been sitting upright/tilted back... engine side is super clean... wiped with acetone... Got my New Ford oil pan and 1-tube of Ford silicone sealant... Any tips before I lay down the silicone bead and tighten the bolts? I know ford has specs on how thick of...
View older results

Random media

wiring diagram
pulsewidthnumbers
IMG_0286
eleanor_part_two_67_
pulsewidth
20103
JS
The_Green_One
DSCF0880
new_wheels
twisted_girth
BD96E951-D6BA-4930-B57B-861923C8984A

Latest posts

Members online

Total: 465 (members: 2, guests: 463)
Top