Search results

  1. S

    Hard start issue.

    First thing in the morning it cranks a really long time. After pressure shows in the dash it starts. I have a pressure gauge 3kpsi on the oil rail (not sure if its a valid test really) just to see what it reads and how long it takes for pressure to build for the HUEI system. At idle it reads...
  2. S

    Company truck goes into limp mode.

    So far the truck has yet to act up after the harness and injector repairs. Thanks firths help. Anyways I'm out to work on a D6C sitting in a raptor on my way out there. Thanks again guys.
  3. S

    Company truck goes into limp mode.

    Since the valve covers where off the fireman decided to change the orings on the injectors. The truck would have a hard time starting in the morning but would run fine threw out the day. I had gotten the truck together and went for a boot with it. My only problem was getting it started. The...
  4. S

    Company truck goes into limp mode.

    I was thinking of doing the PC thing for a while now, since I need one for my Syclone. Although I have found a wire that rubbed threw in the harness that goes over the valve cover on the passengers side, it's a brown wire with a yellow trace on it. It goes to pin 5 on the connector above the...
  5. S

    Company truck goes into limp mode.

    The shop has a temp reader, and the right (passanger)bank was running way cooler than the left. The connector was on the loose side after taking the valve cover off. So now the boss wants both sides off and check everything under the covers since its not going anywhere soon. Ive measured the...
  6. S

    Company truck goes into limp mode.

    I googled the DTC and came across this YouTube video going to get the problem to act up and try his stuff out. http://www.youtube.com/watch?v=GHwjEfJtM_g&feature=youtube_gdata_player
  7. S

    Company truck goes into limp mode.

    Sweet thanks for the info and another in road to problems. This morning I disconnected the aux throttle controller and the truck was running fine. After coming up a hill the truck did the same thing, the only difference this time is I still have throttle responds and a rough idle and lack of...
  8. S

    Company truck goes into limp mode.

    Whats happening guys, I work for a fabrication company that has a fleet of rental Heavy Equipment units. So when anything in the field brakes down we have a F550 as a service truck to go fix what ever brakes down. The truck has a boom, air compressor a whole tool box on the back aux lighting...

Latest posts

Members online

No members online now.
Top